Todos los productos

Great Stuff™ fire block insulating foam sealant is a ready-to-use, minimal-expansion insulating foam sealant that fills and insulates gaps up to 3/4 in to restrict airflow. This distinctly orange solution seals electrical wiring run through wall studs as well as service penetrations in walls and between floors to provide a simple, cost-effective way to maintain the continuity of an approved fire block material throughout the house.

Engineered to form a monolithic seal after drying, 3M™ Fire Barrier Sealant IC 15WB+ is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3 hr fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.

We formulated this fire sealant to dry and form a monolithic firestop seal that also acts as a barrier to airborne sound transmission. 3M™ Fire Barrier Sealant CP 25WB+ is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.

DAP® Fire Stop is a single component, neutral cure, gun-grade silicone firestopping sealant. It is an elastomeric, high-performance sealant capable of meeting the joint movement requirements in a fire-rated joint. Fire Stop is tested for up to a 4-hr fire resistance-rated system at independent laboratories and is approved for both through penetrations and joint applications.

BLOCKADE® is a single component, water-based intumescent acrylic firestop sealant. BLOCKADE® meets ASTM E 814/UL 1479 specification for Fire Tests of Penetration Firestops. Intumescent product expansion fills the void created by combustible materials burned during a fire. BLOCKADE® treats general firestopping applications for combustible and noncombustible penetrations and also has exceptional sealant qualities, such as superb unprimed adhesion, excellent flexibility, easy gunning and is paintable once fully cured.

OSI FlameSeal® fire, smoke and draft stop sealant is a non-flammable, latex-based fire stopping sealant. This one component sealant is designed for use in both residential and commercial fire stopping applications. Developed to seal service penetrations and joints in fire separations and firewalls, it prevents the passage of flame, smoke and fumes under actual fire conditions of 1 hr, 2 hr and 3 hr fire resistance rated systems. It improves STC values and upgrades sound quality. OSI FlameSeal® utilizes a special waterborne technology that is both non-flammable and non-hazardous and cleans up easily with water. Cured product is also mold-and mildew-resistant.

3M™ Fire block sealant FB 136, a one component, water-based, non-combustible draft, smoke and fireblocking sealant designed to resist high temperatures and smoke passage in non-rated construction.

Specifically formulated to meet the demanding needs of professional Painters and deliver outstanding paint finish results. It can be brush painted 20 mins after application or spray painted immediately, so the job gets finished faster. This durable, flexible caulk resists cracking, dirt pick-up and paint glossing. It applies smoothly and easily, has outstanding adhesion to a wide variety of surfaces and provides a 100% waterproof seal. Low odor and easy water cleanup. Cured caulk is mold and mildew resistant. Interior/exterior use. 50 years. Exceeds ASTM C834.

DYNAFLEX ULTRA™ advanced exterior sealant for windows, doors, siding and trim is powered by innovative WEATHER MAX technology for long-lasting, all weather protection. It provides exceptional UV resistance against color fading, yellowing, cracking, chalking and crumbling so the sealant stays looking new. Once cured, DYNAFLEX ULTRA resists mold, mildew and algae for the life of the sealant. The tough surface resists dirt build-up and water absorption for a durable, 100% waterproof seal that stands up to the elements. It has strong multi-material adhesion and stays permanently flexible to endure expansion and contraction caused by sun, heat, cold, wind and rain. It is rain and paint ready in one hour to save time and provide better productivity. Easy to gun out for less fatigue and smooth tooling for a better finish. Easy water clean up and low odor.

DYNAFLEX® ULTRA™ advanced exterior sealant for windows, doors, siding and trim is powered by innovative weather max technology for long-lasting, all-weather protection. It provides exceptional UV resistance against color fading, yellowing, cracking, chalking and crumbling so the sealant stays looking new. Once cured, DYNAFLEX® ultra resists mold, mildew and algae for the life of the sealant. The tough surface resists dirt build-up and water absorption for a durable, 100% waterproof seal that stands up to the elements. It has strong multi-material adhesion and stays permanently flexible to endure expansion and contraction caused by sun, heat, cold, wind and rain. It is rain and paint ready in 1 hr to save time and provide better productivity. Easy-to gun out for less fatigue and smooth tooling for a better finish. Easy water clean-up and low odor.

DYNAFLEX ULTRA™ advanced exterior sealant for windows, doors, siding and trim is powered by innovative WEATHER MAX technology for long-lasting, all weather protection. It provides exceptional UV resistance against color fading, yellowing, cracking, chalking and crumbling so the sealant stays looking new. Once cured, DYNAFLEX ULTRA resists mold, mildew and algae for the life of the sealant. The tough surface resists dirt build-up and water absorption for a durable, 100% waterproof seal that stands up to the elements. It has strong multi-material adhesion and stays permanently flexible to endure expansion and contraction caused by sun, heat, cold, wind and rain. It is rain and paint ready in one hour to save time and provide better productivity. Easy to gun out for less fatigue and smooth tooling for a better finish. Easy water clean up and low odor.

DYNAFLEX ULTRA™ advanced exterior sealant for windows, doors, siding and trim is powered by innovative WEATHER MAX technology for long-lasting, all weather protection. It provides exceptional UV resistance against color fading, yellowing, cracking, chalking and crumbling so the sealant stays looking new. Once cured, DYNAFLEX ULTRA resists mold, mildew and algae for the life of the sealant. The tough surface resists dirt build-up and water absorption for a durable, 100% waterproof seal that stands up to the elements. It has strong multi-material adhesion and stays permanently flexible to endure expansion and contraction caused by sun, heat, cold, wind and rain. It is rain and paint ready in one hour to save time and provide better productivity. Easy to gun out for less fatigue and smooth tooling for a better finish. Easy water clean up and low odor.

DYNAFLEX ULTRA™ advanced exterior sealant for windows, doors, siding and trim is powered by innovative WEATHER MAX technology for long-lasting, all weather protection. It provides exceptional UV resistance against color fading, yellowing, cracking, chalking and crumbling so the sealant stays looking new. Once cured, DYNAFLEX ULTRA resists mold, mildew and algae for the life of the sealant. The tough surface resists dirt build-up and water absorption for a durable, 100% waterproof seal that stands up to the elements. It has strong multi-material adhesion and stays permanently flexible to endure expansion and contraction caused by sun, heat, cold, wind and rain. It is rain and paint ready in one hour to save time and provide better productivity. Easy to gun out for less fatigue and smooth tooling for a better finish. Easy water clean up and low odor.

3006 ULTRA® is a premium sealant featuring outstanding flexibility and adhesion to most surfaces. An excellent choice for any caulking project, it is ideal for filling joints where high levels of movement are expected. Commonly applied at windows and doors, trim, siding, tubs, showers, sinks, toilets, splashboards, countertops and other high movement joints.

3006 Ultra is a premium sealant featuring outstanding flexibility and adhesion to most surfaces. An excellent choice for any caulking project, it is ideal for filling joints where high-levels of movement are expected. Commonly applied at windows and doors, trim, siding, tubs, showers, sinks, toilets, splashboards, countertops and other high-movement joints.

Premium rubberized ultra flexible, ultra clear sealant for sealing and patching a wide variety of surfaces for durable 100% waterproof seal.

DAP® extreme stretch is a premium urethanized sealant ideal for sealing a wide variety of interior and exterior surfaces. It is specially formulated to stretch over 600% ensuring seal does not crack or lose adhesion. The unique formula of extreme stretch is easy-to-apply and tool, low in odor and it cleans-up easily with water, making it perfect for most sealing projects including windows, doors, trim, siding, gutters, flashing, sinks and countertops.

Flex Seal Liquid MAX is liquid rubber in a can. This 2.5 gal. size is excellent for those large jobs. Now you can brush, roll, dip or pour. It starts out as a thick liquid and dries to a strong, flexible, watertight, rubberized coating. Seals out air, water and moisture, and its mildew, chemical and UV resistant.

Flex Seal Rubberized Coating, Net Content: 2.5 gal, Can, Odor/Scent: Mild Solvent, Sweet, Black, Compositions: Methyl-Tris(2-butanonoxime)silane, Octamethylcyclotetrasiloxane, Specific Gravity: 1.22, Flash Point: 169 deg F, VOC Content: 55 g/L, 150 sq-ft Coverage Area, Base Type: Rubber, Resists: Chemical, Mildew, Moisture, UV, Water, Viscosity: 10300 cPs, Curing Time: 48 hr, Drying Time: 24 to 48 hr, Application Method: Brush, Dip, Pour, Roller, Applicable Materials: Aluminum, Asphalt, Brick, Ceramic, Concrete, Copper, CSPE, EIFS, EPDM, Fabrics, Fiberglass, Foam, Glass, Hypalon Polyurethanes, Masonry, Metal, Natural Stones, Plastic, Porcelain, PVC, Stucco, Tile, TPO, Vinyl, Wires, Wood

AMP Self-Leveling Sealant Caulk, Net Content: 9 oz, Cartridge, Paste, Gray, Compositions: Limestone, 1,2-Benzenedicarboxylic Acid, Di-C9-C11-Branched, Organosilane Ester, Flash Point: 100 deg C, VOC Content: 3 to 3.5 g/L, Density: 1.53 to 1.54 g/cc, Resists: Mildew, Mold, Application Method: Caulk Gun, Applicable Materials: Concrete, Masonry, Metal, Stone, Application Temperature: 0 to 140 deg F, Boiling Point: 100 deg C, Flammability Rating: 0

QUIKRETE® gray concrete crack seal is a uniformly blended latex emulsion, specially designed to adhere to all concrete surfaces. No mixing is required. Just pour from the bottle. Blends in with the natural color of concrete.