All products

Anderson Metals Hose Adapter, Nominal Size 1: 1 in, Nominal Size 2: 3/4 in, Connection Type 1: MIP, Connection Type 2: Barb, 150 psi, Operating Temperature: 120 deg F, Nylon

ApolloPEX poly alloy female adapters are the most economical fitting available for the joining of PEX pipe.

A liquid polymer designed to be used in place of water to increase performance of cement mortar beds, non-modified, thin-set mortars and cement-based grouts. It improves working characteristics and performance of cement-based mixes to boost water resistance, shock resistance and freeze-thaw capabilities for tile, stone or masonry installations. Increases performance of non-modified thin-set mortars for setting dense tile and setting over hard-to-bond surfaces. This Admix can be used with non-modified, thin-set mortars such as Custom Blend® thinset mortar, coupling mat mortar as well as with Saltillo grout mix.

Quikrete® Concrete acrylic fortifier is a highly water-resistant acrylic resin formulation designed as a bonding agent admixture for thin Portland cement coatings.

Quikrete® Concrete acrylic fortifier is a highly water-resistant acrylic resin formulation designed as a bonding agent admixture for thin Portland cement coatings.

At only 14 lb, these magnesium stilts are the lightest stilts you can buy. They are ideal for any work up high such as drywall, ceiling installation, painting, trim and electrical. They allow you to work without ladders or scaffolds and are the ultimate in mobility. All repair parts are available and field replaceable.

3 in OD 11 ga (0.120 in wall). 4 in adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted. Holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together.

3 in OD 11 ga (0.120 in wall). 4 in adjustment. Cold rolled steel screw. Turning bar provided with each post. Flow-coated inside and out with red corrosion-resistant paint. Heavy-duty cap and base plates slotted. Holes to fit steel or wood beams. Embossed lugs grip posts firmly to avoid slipping. All parts are welded or wired together.

This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 72 in wide. Use for wood or composite 3-rail fence. The Adjust-A-Gate™ building kit is installed on-site to ideally fit your gate opening every time. Just add wood or composite to match your fence. The Adjust-A-Gate™ steel gate frame kit is the ideal solution for straitening and strengthening your old gate.

This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 72 in wide. Use for wood or composite 3-rail fence. The Adjust-A-Gate™ building kit is installed on-site to ideally fit your gate opening every time. Just add wood or composite to match your fence. The Adjust-A-Gate™ steel gate frame kit is the ideal solution for straitening and strengthening your old gate.

Mill tenons of any length. Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8 to 1-1/4 in thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32 to 1/4 in thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up.

Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.

Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.

Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.

Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.

Is your horse built to work Conquer any jobsite with the all new BORA® Workhorse XT. Its durable steel construction is designed to undertake any task on the jobsite. With a heavy-duty weight capacity of 2700 lb per pair, this sawhorse is reliable no matter where you work on any jobsite. Take your work to the next level with intuitive slide and lock technology, adjusting the Workhorse XT's working height from 30 to 34 in. The sawhorse's pre-drilled end brackets and top beam are designed to create a sacrificial top and attach 2x4 material to connect two sawhorses and create a strong, sturdy workstation. Plus, treat yourself after a long day with the built-in bottle opener on the Workhorse XT's end bracket. Built strong built to last, the Workhorse XT delivers pro-level performance every day at every jobsite.

Henry® 430 ClearPro™ is a premium, clear thin-spread adhesive designed to install vinyl composition tile (VCT) in residential and commercial installations.

For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50 to 60 sq-ft/gal.

Liquid Nails® Adhesive + Caulk in One, LN-150, is specially formulated to bond like an adhesive and seal like a caulk. This high performance acrylic formula is durable, flexible and paintable. It stays white and resists dirt and dust.

PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete and more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 min and can be sanded after 30 min. With a tensile strength of 3770 psi, PlasticBonder™ sets black in color and cures to a hard, permanent bond.

Titebond instant bond is a two-part bonding system that takes between 5 to 15 sec to set and 30 to 60 sec for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond instant bond thin viscosity product offers the fastest assembly time of 5 sec and an initial cure speed of 3 sec. It is ideal for repairing hair line cracks and small defects in wood, as well as repairing loose veneer edges. It can also be used as a finish. While Titebond instant bond activator can be used to further reduce set times, it is not required for producing strong, tight-fitting joints.