All products

Midwest Fastener Conical Anchor, 1/4 in Dia, Thread Size: #10-12, 1 in L, Plastic, Suitable for: #10 x 1-1/4 in Screw

Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

The Spike® is a one-piece, vibration-resistant anchor for use in concrete block or stone. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

The Spike is a, one-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.

Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 in drilled hole for expansion anchor bolt. Concrete must be 2500 psi minimum slab with 4 in minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installed. Concrete slab must allow 4725 lb of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb/cu-ft. Minimum distance from the anchor shaft to one edge of the slab is 4 in from one edge and 6 in from any other edge. Black color.

Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

A necessity for wind protection. Provides do-it-yourself protection for any storage building. May be used to anchor fences, tents, trees, boats, carports, antennas, airplanes, pool covers and playground equipment. Includes 30 in eye anchors with 4 in helix, 4-1/8 in galvanized clamps and 60-1/8 in galvanized aircraft cable. Boxed.

Provides do-it-yourself protection for most outdoor structures or possessions. Aids in the prevention of theft and high wind damage. May be used to anchor trees, fences, carports, antennas, boats, tents, airplanes, awnings and playground equipment. Includes four 15 in eye anchors with 4 in helix and 50 ft x 3/32 in stranded wire. Boxed.

The Guardian Fall Protection wire hook anchor is supremely lightweight and is the ultimate in transportable and easy to use anchorage connectors. It is compatible with a variety of anchors, including compliant scaffolding, railings and small I beams and is certified to withstand loads of up to 5000 lb. It opens by simply squeezing its spring loaded hook and locks around the selected anchor when released. It is ideal for short tasks requiring fall protection and for workers who have to move around to a variety of sites throughout the work day.

Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.

Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.

Engineered for installation in hard density soil. 3/4 in rod, twin 4 in helix.

Engineered for installation in light density soils. 5/8 in rod, 6 in helix.

This insulated T-post gate handle anchor is to be used in conjunction with our fence gate handles. Their screw-in design-type is for T-post gate posts.

Gate hardware and accessories from Koch Industries have a powder-coated finish and assist in hanging, swinging and securing gates.

Our Zareba® wood post screw-in gate anchor is designed for wood posts. It can be used with all fence wire, including high tensile.

Furniture can be dangerous in the home, should they tip or fall. We recommend securing these using specially designed furniture anchors. Dreambaby® hinged metal furniture anchors help discreetly secure furniture in an upright position to the wall to help prevent accidental tipping.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.