All products

Replaces lead protection, contains valve seat anti-wear additive, intended for off-road use. 1 bottle treats up to 20 gal. In a plastic bottle.

A unique formula that immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces, allowing Freeze-Off® to reach deeper and work more effectively than other penetrants. Low-VOC Formula.

A clean cooking grate prevents yesterday's steak dinner from tainting today's carefully seasoned and delicately flavored fish and veggies. Use the Grill Brush to clean your cooking grates before each use so that each meal is as delicious as the next.

AntiJam' design for maximum productivity. Long reach knuckle saver handle with non-slip comfort grip. Die-cast frame and hardened components for extreme durability. High-capacity bottom load magazine with staple count indicator. Extra-wide foot plate prevents tearing and marring. Uses STCR5019, Sku # 744.7915, 'PowerCrown' staples. Use for roofing felt, tar paper, house wrap, insulation, carpet pad and plastic sheeting. Weighs 2.2 lb and stores up to 168 staples (2 full sticks).

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

safe for catalytic converters and oxygen sensors. Added to gas it cleans and lubricates fuel injectors and carburetors, improves gasoline mileage and extends spark plug life. Reduces and prevents varnish and gum build-up. Added to oil it prevents valve sticking and clatter, fortifies properties of engine oil, prevents breakdown caused by extreme temperatures, reduces and prevents acid and sludge formation and promotes easier cold weather starts.

Anderson Metals Solid Pipe Plug, Nominal Size: 1/4 in, MPT Connection, Head Type: Square, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Boshart Combination Pipe Elbow, Nominal Size: 3/4 in, MPT x Insert Connection, Angle: 90 deg, Polypropylene, Gray

Anderson Metals Pipe Nipple, Nominal Size: 1/2 in, MPT Connection, 1000 psi, Brass, 1-1/2 in L

900 lb capacity. Size: 51-1/8 in H x 19-1/4 in W x 17-1/2 in D (130 x 49 x 44.5 cm).

JM Eagle solvent weld Schedule Series pipes are suitable for use in both pressure and drain, waste and vent applications. JM Eagle's wide line of solvent weld includes PVC schedule 40 and 80 for both pressure and non-pressure applications. The pipes are available in 10 or 20 ft lengths, in 1/2 to 16 in Dia in schedule 40, bell end and 1/2 to 12 in Dia in schedule 80, plain end. JM Eagle's ASTM 1785 product also comes in a specially formulated PVC material to increase resistance to ultraviolet rays. Called SolarBlok, it comes in IPS, 20 ft lengths, in brown. Solvent weld joints are designed to provide a rigid joint connection and the schedule-rated products are specifically engineered for use in partial support systems above ground. A 20 ft length of solvent weld schedule 40 PVC water pipe weighs approximately 72 lb.

Magnesium/Potassium/Sodium blend. Fast-acting Zero Ice quickly breaks the molecular bonds that create ice, reducing it to water. Keeps on working for hours, even at temperatures below 0 deg F. Safer to handle. Safer on carpets and floors. Will not leave white, filmy residue. Safer around grass and shrubs. Will not dry out plant life. Safer on shoes and leather goods. Jug with built-in handle and reusable cap. Do not use on fresh concrete, porous concrete or patio block. For top results on concrete surfaces, brush or sweep away puddles after melting has occurred.

Apollo ExpansionPEX female adapters are manufactured using lead-free dezincification-resistant brass. Exclusively designed for use with PEX-A pipe, the fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.

Apollo ExpansionPEX Pipe Adapter, Nominal Size: 1/2 in, Barb x MPT Connection, 200 psi, Operating Temperature: 200 deg F, Poly Alloy, 1.6 in L, Suitable for: Uponor (Wirsbo) ProPEX Piping Systems

Apollo® ExpansionPEX poly alloy 90 deg elbows are exclusively designed for use with PEXa pipe. The fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.

Apollo® ExpansionPEX poly alloy 90 deg elbows are exclusively designed for use with PEXa pipe. The fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.

Apollo® ExpansionPEX poly alloy couplings are exclusively designed for use with PEX-A pipe. The fittings offer a larger ID than traditional crimp fittings for full flow resulting in fast delivery of potable water.

Apollo® ExpansionPEX valves are exclusively designed for use with PEX-A pipe. They offer a larger ID than traditional valves for full flow resulting in fast delivery of potable water. Chrome-plated brass.