All products

End plate. Thermoplastic construction for durability and flexibility. Easy-to snap together and lock. Mid size design to fit over most existing wall openings. Screw catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1, cUL Listed. NEMA WD-1, WD-6. Temperature rating -40 to 65 deg C.

The Vulcan mill file is used for shaping steel or restoring sharp edges and where a smooth finish is important. It's perfect for use on metal, glass, stained glass, ceramic tile, limestone, marble, granite, plastic, or fiberglass.

Jandorf Crossbar Kit, Adjustable, Specifications: Slip 3/8 IP Threaded, Zinc, Dimensions: 15.03 in L x 11.71 in W x 6.57 in H, Suitable for: 3 in, 3-1/4 in or 4 in Electrical Boxes, Includes: 3-7/8 to 5 in Adjustable Crossbar, (2) 1/2 in Mounting Screws and (2) 3/4 in Mounting Screws

Jandorf Flat Crossbar, Specifications: Center Tapped 1/8 IP Threaded, Zinc-Plated, Dimensions: 4 in L

Anderson Metals Connector, Nominal Size: 1/8 x 3/16 in, MIP x Barb Connection, 150 psi, Temperature Rating: 120 deg F, Nylon

Canplas Pipe Wye, Nominal Size: 3 in, Hub Connection, Schedule Rating: SCH 20, PVC, White

Heavy-duty, bakelite crowfoot-design electrical receptacle with 2-pole/3-wire grounding for surface mounting. NEMA 10-50 standard.

Our high-quality standard pattern 150 lb rated stainless steel threaded fittings are manufactured to the highest standards. All stainless steel fittings are monitored by our quality control personnel for strict compliance with applicable standards and specifications. These stainless steel pipe fittings are excellent for uses that involve chemicals or liquids that may be corrosive. Along with fighting corrosion, a stainless steel pipe fitting will prevent contamination making it useful to many professionals.

Automatic adjustable. Inline with vent. Outside arrow indicator for easy changes. Compatible with all single speed power vents. 4.4 A, 120 V, 60 Hz.

Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing

Anderson Metals Reducing Tube Elbow, Nominal Size: 5/8 x 1/2 in, Flare x Male Connection, Angle: 90 deg, 650 psi, Operating Temperature: -65 to 250 deg F, Brass

Used to bring two branch lines into a horizontal drain pipe in drain waste vent applications.

The galvanized bushing are used in connecting galvanized pipes, which are ideal for transporting water; they are also used to join fence posts and rails, as well as scaffolding and protective railings. Connects two different diameters of nipples and pipes.

Insulated, indoor and outdoor. Push to connect. Black.

National Hardware Closet End Cap, Dimensions: 1.81 in L x 0.8 in W, Zinc, Includes: Set Screws

1-1/2 in slip-joint x 1-1/4 in connection.

Top link and lift arm reducer bushings from Koch Industries are yellow zinc-plated and available for category 0 through 3 tractors. Allows for lower category implements to be used on tractors that are one category higher.

High voltage semi-conductor resistor for maximum EMI suppression. Copper core center electrode reduces engine misfire caused by fouling. Triple seal assembly with upper and lower metal gaskets and sillment seal, eliminates spark plug failure due to heat or mechanically induced stress. Triple coated shell, Tintac and Ultraseal over zinc plating resist corrosion and spark plug seizure.

The patented formula of Motsenbocker's Lift Off® Breaks the Molecular Bond™ for fast, easy removal of spray paint, aerosol paint, semi-gloss, high-gloss, acrylic, enamel and oil lacquer from vehicles, street signs, buildings, walls, floors, fiberglass, metal, tile, vinyl, plastic, brick and concrete. Environmental Facts: Less than half the regulated VOC limit. Leaves paint intact and solid for safe and easy clean-up and disposal.

PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to meet the temperature, pressure and size requirements of piping systems that are used in chemical processes and other industrial applications.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.