All products

Type THHN® insulation, rated 90 deg C, 600 V. Gray PVC jacket. For applications of direct burial, dwellings not exceeding 3 floors above-grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry and corrosive locations, general branch circuit wiring and new wiring or replacement wiring. Flame-retardant, moisture, fungus and corrosion-resistant. Sunlight-resistant jacket. JC-30B Federal specification, ASTM B-3, ASTM B-8 and NY state DOS 16120-880923-2002. UL listed.

Type THHN® insulation, rated 90 deg C, 600 V. Gray PVC jacket. For applications of direct burial, dwellings not exceeding 3 floors above-grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry and corrosive locations, general branch circuit wiring and new wiring or replacement wiring. Flame-retardant, moisture, fungus and corrosion-resistant. Sunlight-resistant jacket. JC-30B Federal specification, ASTM B-3, ASTM B-8 and NY state DOS 16120-880923-2002. UL listed.

Romex Building Wire, Type NM-B, Wire Size: 10 AWG, 50 ft L, Number of Conductors: 3, Strands per Conductor: 1, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Solid, Sheath Material: Nylon, Sheath Color: Pink, 600 V, 30 A, Operating Temperature: 90 deg C

Romex Non-Metallic Cable, Wire Size: 10 AWG, 25 ft L, Number of Conductors: 3, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Solid, Sheath Material: Nylon, 600 V, 30 A, Resistance: 1.040 to 1.253 Ohm, Bend Radius: 1.3 in, Operating Temperature: 90 deg C

Inner conductors are type THHN, rated 90 deg C, 600 V. Solid strands. Outer jacket is PVC, rated at 75 deg C. Amp rating of the product is limited to that for 60 deg C rated conductors per the National electric Code Article 336. Dwellings not exceeding 3 floors above-grade. Exposed or concealed wiring. May be fished through walls, ceilings and masonry blocks. Use for new wiring or replacement wiring. Only for use in normally dry locations. UL listed.

Romex Building Wire, NM-B, THHN, 12 AWG Wire, 100 ft Length, 2 Conductors, Strands per Conductor: 1, Copper Conductor, PVC Conductor Insulation, Solid, Nylon Sheath, Yellow Sheath, 600 V, 20 A, 90 deg C Operating

Romex Building Wire, NM-B, THHN, 14 AWG Wire, 100 ft Length, 2 Conductors, Strands per Conductor: 1, Copper Conductor, PVC Conductor Insulation, Solid, Nylon Sheath, White Sheath, 19 mil Sheath Diameter, 600 V, 15 A, 90 deg C Operating, Includes: Ground Wire

For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.

For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.

Solid brass plug blades are firmly embedded in body. Resists chemical attack and is less brittle in extremely low temperatures. With terminal screw clamps. Combination Slot/Phillips head mounting and terminal screws for installation flexibility (Slot/Robertson screws in Canada where available). Terminal screws backed out, ready for wiring. Yellow color. Meets all UL 498 requirements.

For use with stage lighting and similar applications. One-piece with front wire screw terminals. 660 W 250 V. Meets all UL 496 requirements.

Molded of thermoset plastic. Screw terminals are backed out. 1/8 in-27 nipple. 11/16 in bracket length, nickel finish. 660 W, 250 V. Meets all UL 496 requirements.

Meets all UL 498 requirements. Plug blades firmly embedded in body. Size of 1.48 in W x 1.19 in L. 15 A, 125 V. 5/16 in cord diameter. NEMA 1-15.

Nightlights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.

Gardner Bender's innovative mini cable snake is an ultra-compact 15 ft fish tape for installing a variety of wire and cable including electrical wire, speaker wire and network cable over short runs inside walls and ceilings.

Adjusts depth of receptacles and switches to allow proper fit of trim plate.

Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6300 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified.

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low-voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable.

Fastens bell, speaker, telephone and other small wires securely along walls, baseboards. Peel off backing.

Ox-Gard anti-oxidant compound contains prime-grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high-power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a two-fold effect; it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high-power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard anti-oxidant compound is manufactured with unique grease compounded from custom refined low Sulphur oil. The grease base ensures brush-ability over a wide temperature range, tenacious adherence to all surfaces, resistance to water wash out and the prevention of rust and corrosion. This makes the product easier and more reliable to use.

The essential silicone protect and repair tape. Repair tape, another innovation from Gardner Bender, can save the day during emergency repairs. Easier than heat-shrink, cleaner than plumbers' putty and more flexible than a vice grip, repair tape is a household necessity. Add it to the tool box, the workshop shelf and the "junk-drawer" for emergency repairs and maintenance projects. Stretch, wrap and protect or repair everything from leaky hoses, pipe insulation, electrical connections, tool handles, air ducts and cord/rope ends.