All products

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.

Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation.

The Guardian Fall Protection poly steel rope is ideal for high-moisture environments. Nylon rope, when wet, will typically reduce in strength by between 10 to 15%, but unlike nylon, poly steel rope does not absorb water, so will not diminish in strength in wet conditions. This rope is also particularly strong when it comes to resisting damage from ultraviolet light and its synthetic composition makes it especially resistant to cuts and abrasion, thereby increasing equipment lifetime. Poly steel is ten times stronger than polypropylene and while it may become fibrous, this is just a result of normal wear and does not indicate it needs to be replaced. It is 5/8 in THK and is available with a variety of component configurations, including a shock absorber, positioning device, 18 in extension lanyard and two double locking snap hooks.

The Carlon® SuperBlue™ hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid Non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon® SuperBlue™ boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wire fill capacity in their class and come with molded-in nailing flanges as well as molded-in clamps to make installation faster. Carlon® SuperBlue™ boxes are lightweight, Non-corrosive and Non-conductive. They are designed to nest inside one another so they take up less shelf space and are easier to transport to job sites.

Navigate through worksite terrain with the ToughSystem® 2.0 rolling toolbox. With its 8 in wheels, this toolbox is engineered and designed for rugged terrain mobility. Its patented auto-connect side latches allow one-handed operation. It also has two-piece metal front latches for added durability when securing tools inside of the box. This toolbox has 20% larger storage capacity when used with DWST08165 and DWST08300 as part of a tower. The ToughSystem® 2.0 rolling toolbox is built for real jobsite conditions with high impact protection. It is dust and water-resistant with an IP65 rating and has a 250 lb load capacity. The toolbox has a removable inner tray for optimal organization. The ToughSystem® 2.0 rolling toolbox is backwards compatible with any ToughSystem® product.

Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL listed, RoHS Compliance.

For flexible conduit. Non-metallic, Non-conductive, corrosion-resistant plastic.

For use with Non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Connects to uneven floors (up to 1/2 in height difference). Provides a smooth transition between adjoining floors. No fasteners required.

Locking pliers without wire cutter constructed of high-grade, heat-treated alloy steel for maximum toughness and durability. Straight jaws with hardened teeth provide maximum contact on flat, square or hex work. Guarded release trigger quickly unlocks and protects from accidental release are made to grip from any angle. Used for tightening, clamping, twisting and turning.

Combination two-gang/four square box. Eccentric knockouts, non-metallic and non-conductive.

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.

This easy-to-use, compact clamp fits easily into tight spaces. Features a 2 in reach and clamps materials up to 2 in thick. Classic face clamps are designed for creating ideally flush Kreg joints and they work great for lots of other shop and project tasks that require solid clamping without marring. These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. When used in Kreg joinery, the extra-large clamp face gets positioned on the "show" side of the joint. Classic face clamps are available in two sizes, 2 in reach and 3 in reach. Both have a simple screw that adjusts the clamp to match material thickness, plus comfortable padded handles. Both are compatible with the Kreg Jig® R3's clamp pad adapter.

3M™synthetic steel wool pads won’t shred, splinter or rust. Rinse and re-use. Compatible with water-based strippers and finishes. Replaces steel wool.

Steel wool is a very versatile material and can be used for a variety of household, re-modeling and construction tasks. Homax® steel wool, assorted-grades is made of uniform, high-quality metal strands. The package includes 3-grades of steel wool : coarse (#3), medium (#0) and fine (#000). Use coarse-grade for stripping, medium-grade for between coats and fine-grade wool for finishing.

Diablo's premium 6 in 100-grit (Medium) random orbital sanding (ROS) discs with Hook-and-Lock backing includes break-through innovations that improve performance, extend sanding life and increase productivity. These sanding discs are designed for use in orbital and DA sanders and are ideal for all types of wood, metal and plastics.

Multy Home Rug, Runner Shape, Concord Pattern, Polypropylene, Charcoal, 50 ft Length, 26 in Width, Resists: Slip, Washing Instruction: Spot Clean

2 in flexible blade for applying compounds, smoothing and taping. Get the flexibility you need without the rusting or knicking. Constructed with 54 Rockewell C hardness. Superior grip has overmold cushioning. Rivet-free construction complete with a Hammer Head® end.