All products

The QEP 4-5/8 in suction cup is designed to help maneuver non-porous, smooth tiles, such as marble, granite and glass during installation. This suction cup can hold tiles up to 12 lb. The grasp and release handle speeds up tile maneuvering.

Tough molded housing and lenses with phosphor bronze contacts for durability. Belljar design, gasketed lenses prevent water from reaching bulbs and contacts. Use as a rear light for over 80 in W applications. Exceeds DOT requirements for stop, turn, tail, rear and side reflector, side marker and rear clearance. Includes No.452 Belljar submersible lights, 25 ft trailer harness, 48 in trunk connector, plastic license bracket, all mounting hardware and installation instructions. Front side marker lights and reflectors needed to meet DOT requirements.

Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use.

The Strong-Drive WSV Subfloor screw is the only fastener to be dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening. 2 in WSV Subfloor screws are recommended for Advantech® flooring and sheathing products. Fastening with WSV Subfloor screws provides excellent holding power and combining the WSV Subfloor screw with adhesives can provide the ultimate subfloor solution. This testing indicates that the WSV Subfloor screws have lateral, shear and withdrawal values that exceed those of 10d common nails and diaphragms built with WSV Subfloor screws meet or exceed the strength and stiffness of wood frame diaphragms built with 10d nails.

Simpson Strong-Tie® has re-engineered its popular subfloor screw to reduce driving force and increase installation speed. The new Strong-Drive® WSV subfloor screw has been developed for fastening subfloor sheathing using the Quik Drive auto-feed screw driving system. This testing indicates that the WSV Subfloor screws have lateral, shear and withdrawal values that exceed those of 10d common nails and diaphragms built with WSV subfloor screws meet or exceed the strength and stiffness of wood frame diaphragms built with 10d nails.

Simpson Strong-Tie® has re-engineered its popular subfloor screw to reduce driving force and increase installation speed. The new Strong-Drive® WSV Subfloor screw has been developed for fastening subfloor sheathing using the Quik Drive auto-feed screw driving system. This testing indicates that the WSV Subfloor screws have lateral, shear and withdrawal values that exceed those of 10d common nails and diaphragms built with WSV Subfloor screws meet or exceed the strength and stiffness of wood frame diaphragms built with 10d nails. The coating system on the WSVF screws will provide corrosion resistance for use with wood and wood-based materials in dry service where the wood and wood-based materials have treatment retentions typical of AWPA Use Categories 1 to 4A and fire-retardant-treated-wood and wood-based materials that are recognized in an evaluation report where corrosion effects of the fire-retardant chemical are referenced to code prescribed protection systems for carbon steel fasteners.

The Strong-Drive WSV Subfloor screw is the only fastener to be dual-evaluated under ICC-ES AC233 and AC120 for wood-frame subfloor fastening. 2 in WSV Subfloor screws are recommended for Advantech® flooring and sheathing products. Fastening with WSV Subfloor screws provides excellent holding power and combining the WSV Subfloor screw with adhesives can provide the ultimate subfloor solution. This testing indicates that the WSV Subfloor screws have lateral, shear and withdrawal values that exceed those of 10d common nails and diaphragms built with WSV Subfloor screws meet or exceed the strength and stiffness of wood frame diaphragms built with 10d nails.

SturdiMount fiber cement blocks are manufactured using cellular PVC. Their engineered water management system maintains integrity with its innovative pre-flashed, pre-assembled design. The 12 color-matched colors provide a clean finished look you can't get anywhere else. Our trim white can be left white or painted.

SturdiMount fiber cement blocks are manufactured using cellular PVC. Their engineered water management system maintains integrity with its innovative pre-flashed, pre-assembled design. The 12 color-matched colors provide a clean finished look you can't get anywhere else. Our trim white can be left white or painted.

SturdiMount fiber cement blocks are manufactured using cellular PVC. Their engineered water management system maintains integrity with its innovative pre-flashed, pre-assembled design. The 12 color-matched colors provide a clean finished look you can't get anywhere else. Our trim white can be left white or painted.

Mr. BAR-B-Q Stuffed Burger Press, Plastic Handle, Plastic

StudSensor™ 70 quickly and easily locates the center and edges of wood and metal studs and joists behind walls, floors and ceilings. Patented CenterVision® technology finds the center of studs in a single pass. A built-in erasable wall marker allows for one-handed operation.

The SP1 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections. These stud-plate ties feature angled holes for a positive connection from the stud to the plates.

The stud plate tie series offers general solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate and several are suitable for double top plates and studs.

Protects pipes and wiring installation.

The SP1 and SP2 are designed as stud-to-plate connections to resist uplift. The SP1 is designed for sill-to-stud connections while the SP2 is for the double-top-plate-to-stud connection. These stud-plate ties feature angled holes for a positive connection from the stud to the plates.

Protects pipes and wiring installation.