All products

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in Dia.

Campbell Pulley, Single Sheave, Working Load Limit: 55 lb, Eye Diameter: 7/32 in, Rope Size: 5/16 in, Sheave Size: 1 in, Sheave Material: Brass, Block Material: Zinc, Nickel

Campbell Pulley, Double Sheave, Working Load Limit: 400 lb, Rope Size: 3/8 in, Sheave Size: 1-1/2 in, Sheave Material: Zinc, Block Material: Steel, Zinc, Wall Mounting

Increases power from existing winch. 20,000 lb capacity.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

For A belts, pulleys from 2 in to 12 in have keyways except 3/8 in and 1/2 in bores and 3/4 in bores in pulleys less than 4 in in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2 in x 11/32 in belts.

Furnished with hollow head set screws. For 4L or 1/2 in x 11/32 in belts.

The 141 4-step pulley measures 2 in, 2-1/2 in, 3-1/2 in and 4 in. It is die cast zinc allow No. 3 and is designed for fractional horsepower usage only. 4 in Dia.

Furnished with hollow head set screws. For 4L or 1/2 in x 11/32 in belts.

The Vulcan claw is made of heat treated carbon steel blade with a square plastic handle.

SpeeCo's metal T-post puller allows the t-post to be removed from the ground with a tractor bucket, chain, Handyman jack or a S-hook. Its innovative slot design allows the use of different gauges of chain. Its simple and durable design is easy and quick to use.

Our 9 in finish nail puller is equipped with our SMOOTHPULL™ high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the nail puller is struck by a hammer. The beveled edges of the nail puller claws allow for better grip on hard-to-reach nails. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 6D to 12D nail slots, deliver increased efficiency on the jobsite.

A versatile and easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head is off or buried deep in the wood.

The Hyde® molding puller was designed to remove baseboard, trim and other molding materials from walls without damage to those materials. Due to its heavy-duty construction, this molding puller also excels at a secondary use for tile, carpet and other types of flooring removal. The patent pending Hyde® molding puller design has a built-in "wedge" feature on the 90 deg angle that can safely be driven between the materials. It works by spreading the applied force out along a larger surface area and gradually increasing the angle away from the wall to avoid damage.

Our 10 in molding puller is equipped with our SMOOTHPULL™ high-leverage head delivering maximum leverage for quick nail removal. The durable grip is wear-resistant for continual comfort over the life of the tool and reduces vibration when the trim puller is struck by a hammer. The beveled edges of the trim puller claw allow for better grip on hard to reach nails and the whale tail claw helps with wedging and prying in tight spaces. The sharpened claws and integrated nail removal feature on the head of the tool provide you with effective ways to remove embedded nails, reducing damage to surrounding materials. The unique head geometry, combined with optimized 8D to 16D nail slots, deliver increased efficiency on the jobsite.