All products

Watts Quick-connect valves are designed and manufactured for many years of trouble-free service. Produced of off white polysulfone, a high-performance thermal plastic material. The Watts quick-connect design allows for quick and easy connections without the use of installation tools.

Sea Tech® 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech® 24 Series fittings. The Sea Tech® quick-connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech® fitting in place for a zero leak connection.

Watts Quick-connect valves are designed and manufactured for many years of trouble-free service. Produced of off white polysulfone, a high-performance thermal plastic material. The Watts quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

SharkBite® elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

SharkBite® reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue.

Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an overhead surface such as a ceiling) and they provide additional stability. SharkBite® Hy-Ear elbows do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal water tight seal.

The SharkBite® straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPSM fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/4 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

Dishwasher elbows are a 90 deg fitting that connects the hot water line to the dishwasher. SharkBite® dishwasher elbows enable quick and easy connection and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 7/8 in BC fitting rotates fully under pressure, connects to multiple materials without the use of installation tools and features an integral collet with stainless steel gripping teeth and patented O-ring guide design. The pressure rating is 100 psi at 180 deg F (6.9 bar at 82 deg C) or 250 psi at 75 deg F (17.2 bar at 24 deg C).