All products

Wire hair pin clips from Koch are yellow zinc-plated and are commonly used in farm, lawn, garden and other applications to secure attachments and pins.

Koch Wire Hair Pin Clip, Pin Diameter: 3/32 in, 1-5/8 in OAL, Zinc, Yellow

Koch Wire Hair Pin Clip, 1/8 in, 1-15/16 in L, Zinc, Yellow

Koch Wire Hair Pin Clip, 5/64 in, 1-3/32 in L, Zinc, Yellow

Hillman Escutcheon Pin, Head Type: Round, Shank Type: Smooth, Material Gauge: 18 ga, Steel, Brass-Plated, 3/4 in L, Additional Information: 1.5 oz Weight

Hillman Escutcheon Pin, Head Type: Round, Shank Type: Smooth, Material Gauge: 16 ga, Steel, Brass-Plated, 1 in L, Additional Information: 1.5 oz Weight

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation.

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.

Use with Ramset, Hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.

Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Powder Plated, Suitable for: Powder Actuated Tools

Waddell Dowel Pin, Hardwood, 1/4 in Diameter, 1-1/4 in Length

Waddell Dowel Pin, Hardwood, 1/2 in Dia, 2 in L

Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1-5/8 in. tube OD frames. Meets OSHA standards for safety.

With silver zinc plating. 5/16 in Dia, 2-1/2 in usable length.

Koch Cotter Pin Assortment, Steel, Zinc-Plated, Number of Pieces: 555, Includes: (150) 1/16 x 1 in, (150) 3/32 x 1 in, (100) 3/32 x 1-1/2 in, (75) 1/8 x 1-1/4 in, (50) 1/8 x 2 in and (30) 5/32 x 2-1/2 in Cotter Pins

DEWALT Fastener, Collation Type: Plastic, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.102 in Dia, 0.73 in L, Steel, Yellow Zinc, Suitable for: DCN890B, DCN890P2, DCN890 Nailer

DEWALT Fastener, Collation Type: Plastic, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.102 in Dia, 3/4 in L, Steel, Zinc, Suitable for: DCN890B, DCN890P2, DCN890 Nailer

DEWALT Fastener, Collation Type: Plastic, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 1/2 in L, Steel, Zinc, Suitable for: DCN890B, DCN890P2, DCN890 Nailer

DEWALT Fastener, Collation Type: Plastic, Collation Angle: 15 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 0.68 in L, Steel, Yellow Zinc, Suitable for: DCN890B, DCN890P2, DCN890 Nailer