All products

For outdoor enclosures with removable closing caps.

Fits 1 in spindle, includes bearings, seals, cap and nuts.

Fits 1 in spindle, includes bearings, seals, cap and nuts.

Includes hollow head set screws. 4 holes.

Includes hollow head set screws. 4 holes.

Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat.

For use with MLO and MCB loadcenters and circuit breaker enclosures.

For use with MLO and MCB loadcenters and circuit breaker enclosures.

For use with MLO and MCB loadcenters and circuit breaker enclosures.

For load centers No PL0724R and Challenger No S3100RN, commonly used on WNB breakers.

For load centers No PL0724R and Challenger No S3100RN, commonly used on WNB breakers.

For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.

Hubs suitable for 3R switches.

Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.

Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.

For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.

For use on all Siemens loadcenters, main lug, main breaker and meter socket, plus enclosed circuit breakers Nos. WB2225, WB3225.

Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.

Aluminum, for use on NEMA 3R (outdoor) enclosures. Off-center conduit threaded opening and elongated mounting holes reduce the need for conduit offsets and bends while allowing for adjustments. Type B size and is UL and CSA safety listed.

Richmond Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 1/2 in, BTU Rating: 38000 Btu/hr, Gas Type: Natural Gas, 1.5 gpm, Tank Capacity: 50 gal, Energy Efficiency: 0.68, Heating Chamber Material: Stainless Steel, Recovery Rate: 38 gph at 90 deg F, Vent Type: Powered Damper, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14 in, Tank Height: 59-1/4 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 21-3/4 in Dia, Includes: 19 ft Cord, 3-Prong Plug, Temperature and Pressure Relief Valve

Richmond Gas Water Heater, Inlet Connection Size: 3/4 in, Outlet Connection Size: 1/2 in, BTU Rating: 38000 Btu/hr, Gas Type: Natural Gas, 1.11 gpm, Tank Capacity: 40 gal, Energy Efficiency: 0.64, Heating Chamber Material: Stainless Steel, Recovery Rate: 38 gph at 90 deg F, Vent Type: Powered Damper, Vent Size: 3, 4 in, Water Connection Location: Top, Gas Connection Height: 14 in, Tank Height: 60-1/4 in, Emissions: Ultra-Low NOx, Dark Warm Gray, Dimensions: 19-3/4 in Dia, Includes: 19 ft Cord, 3-Prong Plug, Temperature and Pressure Relief Valve