All products

1/2 in MIP and 1/2 in sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, one-piece O-ring bonnet and rubber-coated oval handle.

1/2 in MIP and 1/2 in sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, one-piece O-ring bonnet and rubber-coated oval handle.

3/4 in MPT x 3/4 in Insert.

Apollo Press Tool, 1/2 to 1 in

An additive for hydraulic systems that stops leaks and increases hydraulic pressure. Use in new units to stop initial wear and increase fluid life. Lucas hydraulic oil booster and stop leak was formulated to renew hydraulic fluid with an additive package that stops seal leaks, boosts pressure, reduces operating temperatures and increases the life of hoses, rams and cylinders. It is an inexpensive solution to most hydraulic problems and a perfect preventative maintenance product.

An additive for hydraulic systems that stops leaks and increases hydraulic pressure. Use in new units to stop initial wear and increase fluid life. Lucas hydraulic oil booster and stop leak was formulated to renew hydraulic fluid with an additive package that stops seal leaks, boosts pressure, reduces operating temperatures and increases the life of hoses, rams and cylinders. It is an inexpensive solution to most hydraulic problems and a perfect preventative maintenance product.

Complete framing, cabinetry and other applications in tight areas with our quietest impact driver. The 20 V MAX XR® brushless cordless 1/4 in quiet hydraulic impact driver helps reduce noise disturbance in sensitive environments with up to 57% quieter operation. Featuring an advanced hydraulic mechanism, this impact driver delivers consistent performance for demanding applications in tough conditions.

Heavy-duty construction. Mounts on house or post. Heavy-duty cam lock with 2 keys. Rustproof. Extra large capacity. Size of 17.1 in W x 13.3 in H x 8.4 in D.

Heavy-duty injection-molded plastic construction in extra-large size to accommodate large jobs for quick clean-up.

This hutch is strong, durable and rust-resistant for indoor or outdoor use. Excellent for rabbits, hamsters, guinea pigs, chinchillas, ferrets, gerbils and other small animals. Made of chewproof, easy-to-clean galvanized steel wire mesh. Door is surrounded by protective vinyl guards, with spring-tension door latch. Sides are 2 in by 1 in mesh and bottom is 1 in by 1/2 in mesh. Hutch measures 24 in long by 24 in wide by 16 in high. Easy assembly required; wire clips are included. Use Pet Lodge Wire Clip Pliers. Hutch is stackable up to four high when used with the Pet Lodge rabbit hutch frame kit.

The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top-plates and the wall studs. A value added solution for high-wind applications, it is designed to resist uplift and lateral loads. By capturing all three framing members, the H2A eliminates the need for a separate top-plate-to-stud connection.

The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking.

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.

The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting I-joist rafters to double-top-plates as well as studs to sill plates.

The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.

The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking.

The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed in pairs.

The HS24 attaches the bottom chord of a truss or rafter at pitches from 0/12 to 4/12 to double 2 x 4 top-plates. Double-shear nailing allows for higher lateral resistance in applications when bottom chord of truss or rafter has no slope. The HS24 saddle rafter tie is designed to help resist wind and seismic forces.

The H10S attach to the truss joist and provide good uplift resistance.

The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.