Todos los productos

Materials, tooth configuration and heat treating are designed to maximize performance in specific cutting applications. Durable, long-life blades. Blade has a 1/2 in universal tang that fits all SAWZALL®s and standard competitive saws. For cutting hardwood floor, cast iron, stainless steel, fiberglass materials, (polyesters, epoxies, melamine's), ceramic tile, stone, slate, clay pipe, carbon, brick, plaster, marble and chalkboard.

The ductwork SAWZALL® blade has been engineered to specifically address the unique frustrations encountered when installing ductwork take-offs. The ductwork SAWZALL® blade completely eliminates the need to carry multiple tools, lightening up your tool belt and greatly speeding up the installation process. Engineered with a pierce-point tip, the ductwork blade plunges into sheet metal with ease and the tapered profile design allows the blade to make both radius and square cuts, accommodating any type of take-off installation.

The drywall access SAWZALL® blade has been engineered to specifically address the frustrations encountered when doing plumbing and electrical service work behind installed drywall. The new drywall access blade is only 2-1/2 in long, optimized to cleanly cut through up to 5/8 in drywall but avoid damage to pipe and wire behind the wall. The blade's unique multi-directional tooth design allows the user to cut in all directions, for maximum finesse in small diameter cutting.

We engineered The TORCH™ with carbide teeth to deliver extreme blade life and unmatched versatility. This SAWZALL® blade is the best solution for thick and extreme metal cutting applications. The TORCH™ with carbide teeth delivers up to 50X life over standard recip saw blades. The heavy-duty blade cuts through a wide variety of metal materials including black pipe, angle iron, cast iron, stainless steel and high strength alloys. Each tooth has 25% more carbide than leading carbide competitors. An optimized tooth design ensures The TORCH™ blades deliver extreme life in thick and extreme metal cutting applications.

Our WRECKER™ with carbide teeth SAWZALL® blades are the most versatile carbide blade on the market. These multi-material SAWZALL® blades offer up to 50X more life vs bi-metal reciprocating saw blades available today. The Milwaukee WRECKER™ Carbide SAWZALL® blades offers a 6 TPI design, which allows for cutting into a wide variety of materials from clean wood to cast iron for quick demolition and remodeling work. The Fang Tip™ Design allows for faster plunge cuts into wood materials. Milwaukee carbide teeth products allow you to cut longer, cut more and cut faster than other carbide-teeth blades on the market.

The AX™ SAWZALL® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood demolition blade on the market.

The Torch™ metal-cutting blades with the double-duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.

The Torch™ metal-cutting blades with the double-duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.

The Torch™ metal-cutting blades with the double-duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Neck™ is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron™ features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.

Our AX™ with carbide teeth SAWZALL® blades for pruning and clean wood are designed for the fastest above and below ground cutting applications. These SAWZALL® pruning blades offer up to 50X more life vs carbon steel reciprocating saw blades today. The Milwaukee® AX™ blades for pruning and clean wood cutting offer a 3 TPI design, which allows for the fastest cutting in clean wood and a low profile blade geometry designed for root removals. Our optimized carbide teeth withstand abrasives like rock, sand and dirt as users remove roots for trenches or stumps for tree removals. Milwaukee® carbide teeth products allow you to cut longer, cut more and cut faster than other carbide teeth blades on the market.

Our AX™ with carbide teeth SAWZALL® blades for pruning and clean wood are designed for the fastest above and below ground cutting applications. These SAWZALL® pruning blades offer up to 50X more life vs carbon steel reciprocating saw blades today. The Milwaukee® AX™ blades for pruning and clean wood cutting offer a 3 TPI design, which allows for the fastest cutting in clean wood and a low profile blade geometry designed for root removals. Our optimized carbide teeth withstand abrasives like rock, sand and dirt as users remove roots for trenches or stumps for tree removals. Milwaukee® carbide teeth products allow you to cut longer, cut more and cut faster than other carbide teeth blades on the market.

The next generation wrecker is designed for multi-material demolition cutting. This mean it has the capability of cutting nail embedded wood, plastics and a variety of metals. This blade has 25% more HSS for increase life and durability. With all of these features, the next generation wrecker is a true demolition blade for the professional user.

Milwaukee® track saw blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific cobalt infused tungsten carbide to extend cutting life and maintain tip sharpness. The blades feature a laser cut body and laser cut vibration slots to reduce wobble and warping. With an anti-friction coating, the blades resist corrosion and gumming. A thin kerf™ design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee® track saw blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific cobalt infused tungsten carbide to extend cutting life and maintain tip sharpness. The blades feature a laser cut body and laser cut vibration slots to reduce wobble and warping. With an anti-friction coating, the blades resist corrosion and gumming. A thin kerf™ design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee® track saw blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific cobalt infused tungsten carbide to extend cutting life and maintain tip sharpness. The blades feature a laser cut body and laser cut vibration slots to reduce wobble and warping. With an anti-friction coating, the blades resist corrosion and gumming. A thin kerf™ design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee® track saw blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific cobalt infused tungsten carbide to extend cutting life and maintain tip sharpness. The blades feature a laser cut body and laser cut vibration slots to reduce wobble and warping. With an anti-friction coating, the blades resist corrosion and gumming. A thin kerf™ design delivers faster cuts as well as more cuts per charge when using a cordless tool.

For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals and other soft materials. Use with all brands of multi-purpose oscillating tools.

Featuring an extended performance diamond matrix, DeWALT® XP segmented blades deliver 350 times the life of conventional abrasives. Segmented, laser-welded rim blades with heat-treated steel bodies offer expedited cutting and extreme durability. Large diamond and cobalt segments ensure fast cuts across a variety of tough masonry applications.

Keep your tree trimming system performing at its best by replacing a dull blade with a fresh one.

Designed to replace the saw blade for our Power-Lever® extendable tree pruner or our Pruning Stik® extendable tree pruner.

Fiskars Pole Pruner Blade, 12 in Blade, Steel Blade