Todos los productos

Made from real oak wood, this stylish wallplate adds simple elegance to your decor. Decorating with wallplates is an economical way to make great impact in your home.

Coated in heavy-duty titanium for long life and equipped with a 135 deg speed tip that helps to reduce walking, DeWALT® titanium drill bits are ideal for drilling light-gauge metals. A parabolic flute design improves chip ejection while drilling.

Built for speed and long-life, DeWALT® cobalt alloy steel drill bits power through hard metals with ease. These heavy-duty cobalt alloy steel drill bits deliver 4X longer life in stainless steel. These drill bits feature either the pilot point tip, the split point tip or chisel point tip design that starts on contact and eliminates bit walking.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable and able to withstand drilling temperatures up to 2000 deg F, no center punch needed. Use with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Used in repetitive metal drilling with portable drills or stationary drill press. Jobber length.

Constructed from one solid piece of heavy-duty metal, DeWALT® IMPACT READY® titanium drill bits are up to 5X more durable than 2-piece conventional bits. A patented web tapered helps to increase bit strength and a patented pilot point tip delivers speed and clear, burr-free holes with helps to reduced bit walking. Ideal for metal, wood and plastic.

For rotary or percussion drilling. Chrome vanadium steel shank with tungsten carbide/cobalt tip that is resharpenable and able to withstand drilling temperatures up to 2000 deg F, no center punch needed. Use with cordless drills, corded drills and drill presses in applications such as masonry, ceramic tile, concrete, brick, fiberglass, plexiglass, glass, cast metals, hardened steel, granite, marble, woods, plastics. Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel.

These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.

These 1-1/4 in x 9/16 in graphite metallic steel staples are designed to secure 14/3, 12/3 and 10/3 NM cables. These strong steel staples feature burr-free, sharper tips so the legs drive in straight without splitting wood and are engineered with recessed heads to protect cable jackets. Virtually oil-free for cleaner handling and manufactured to contractor preferred length. Designed to be driven into wood with a hammer. Made in the USA.

For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip build-up within stack. 3/32 in thick chipper for adjusted cut widths in 1/32 in increments, doubles the number of slot widths available and fits plywood 1/32 in undersized from nominal width with less shimming. Shim set included for fine adjustments. Square tooth design, shorter and thicker, reduces drag in cuts and the materials guiding effects; also increases number of sharpening obtainable. Includes four 1/8 in, one 3/32 in and one 1/16 in chipper, 1/8 in kerf.

For the weekend woodworker to use on all table and radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. For underpowered saws because requires less power to feed. Negative hook angle makes flat bottom grooves and virtually splinter-free cuts. Anti-kickback design. Resharpenable set produces grooves from 1/4 to 13/16 in, in 1/16 in increments. Includes 2 outside blades, four 2-wing 1/8 in chippers and one 1/16 in chipper, 1/8 in kerf.

Valley Forge Stick Flag, 8 in W, 12 in H

Continuous rim for chip-free cutting. Can be used on right-angle grinders and hand saws as well as tile saws for both wet and dry cutting.

Hole enlarging features bit single flute cutting edge for greater control through steps and a true round hole, three flatted shank prevents slipping in drill chuck. Used in applications such as drilling holes into thin stainless steel, copper, brass, aluminum, plastic and laminates, pilot hole required.

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper.

Silicon bronze for copper to copper. UL listed.

From premium white knit to colored rags, we have a wide array of wiping rags for your job. All varieties are absorbent and soft. These wipers are ideal for painting, staining and faux finishing projects, as well as cleaning, polishing and many other tasks. Trimaco full line of knit rags includes Premium, super bright white T-shirt rags, T-shirt knit, smooth, bleached T-shirt rags, mixed white knits, an economical blend of white T-shirts and mixed knit rags, heather gray knits, an assorted blend of heather grey knit rags, colored knits, an all-purpose rag that is absorbent and economical. Be sure to explore Trimaco full line of wiping products.

Carlon Solvent Cement, Net Content: 1/2 pt, Can, Liquid, Odor/Scent: Ether, Gray, Compositions: Tetrahydrofuran, Butanone, Cyclohexanone, Acetone, Ethene, Chloro, Homopolymer, Specific Gravity: 0.925, Boiling Point: 132.8 deg F, Flash Point: -4 deg F, VOC Content: <510 g/L, Application Method: Brush, Flammability Rating: 3, Temperature Rating: 40 to 100 deg F, Applicable Materials: PVC

From premium white knit to colored rags, we have a wide array of wiping rags for your job. All varieties are absorbent and soft. These wipers are ideal for painting, staining and faux finishing projects, as well as cleaning, polishing and many other tasks. Trimaco full line of knit rags includes Premium, super bright white T-shirt rags, T-shirt knit, smooth, bleached T-shirt rags, mixed white knits, an economical blend of white T-shirts and mixed knit rags, heather gray knits, an assorted blend of heather grey knit rags, colored knits, an all-purpose rag that is absorbent and economical. Be sure to explore Trimaco full line of wiping products.

Trimaco's SuperTuff Mixed Knit Rags are all purpose, economical, and made of white t-shirt material. Great for any task on the job or around the house.

Tie on bonnets made of 100% lambs wool. Withstands multiple washings and chemicals. Used on heavily soiled surfaces for applying waxes, glazes and compound.