Todos los productos

Used for marine applications in areas of water or moisture. Thermoplastic elastomeric (TPE) exterior. Glass filled nylon and glass filled polypropylene interior. 15 A, 125 V. Temperature rating of -40 to 70 deg C. Listed to UL 498 (file no.E3663) and watertight. NEMA 5-15.

Used for marine applications in areas of water or moisture. Thermoplastic elastomeric (TPE) exterior. Glass filled nylon and glass filled polypropylene interior. 15 A, 125 V. Temperature rating of -40 to 70 deg C. Listed to UL 498 (file no.E3663) and watertight. NEMA 5-15.

Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.

Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box.

Romex Building Wire, Type NM-B, Wire Size: 14 AWG, 50 ft L, Number of Conductors: 3, Strands per Conductor: 1, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Solid, Sheath Material: Nylon, Sheath Color: Blue, Sheath Diameter: 19 mil, 600 V, 15 A, Operating Temperature: 90 deg C, Includes: Ground Wire

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 Conduits

For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.

Safe, Non-conductive. For dead-end terminations. With integral mounting feet. will not rust or corrode. 18 cu-in capacity. UL listed.

Main lug indoor load center, 100 A, 6 space/12 circuit. NEMA type 1 enclosure. Single phase, 3-wire, solid neutral. Expandable load center capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian Homeline breakers.

Single phase, 1-pole, 2-wire, solid neutral, 120/240 VAC. Rated 2 hp at 120 VAC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL listed, meets NEMA standard KS1. 5 in x 7.63 in x 4 in.

Orbit Industries' handy boxes and extension rings mount on the surface of the wall and are used in the installation of switches, receptacles and other electrical devices. They are constructed from 16 ga galvanized steel. The welded, 1-7/8 in deep boxes include 1/2 in knockouts. Selected models include an FB bracket to mount on the flat side of the stud and an AB bracket to mount on the face and side of the stud.

The DWE64233 5 in hook and loop pad - medium is an eight-hole replacement pad for sanders with dust collection.

Fits tightly into a corresponding hole to fasten or align two adjacent pieces.

The fits Kohler class five 3 in flapper toilet Tank flapper is designed to fit Kohler parts: 1016546 and 1042313. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. This is a large 3-1/4 in replacement toilet flapper designed to fit rectangular, black flush valves. Made of flexible rubber for a tight seal and easy to install.

The ProSource glazing tool flat end are used to clean out old putty. Use V-shape end to apply and smooth new putty. The blade is made of high carbon steel.