Todos los productos

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA Type 1 indoor enclosure, 1/4 in NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified.

Water pump pressure switches suitable for use on all types of pumps including jet, submersible and reciprocating. 2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant, NSF61-Annex G certified. Individually boxed.

Outdoor use, rugged metallic construction. Powder coat finish. Scratch-resistant. Includes installation hardware, gasket and multi-lingual instructions. CULus/UL listed. NEMA 3R rated.

Cutler-Hammer Circuit Breaker, Type BR, 120/240 V, 60 A, Operating Frequency: 50/60 Hz, Number of Phases: 1, Number of Poles: 2, Interrupt Rating: 42 kA, Wire Size: 8 to 1/0 AWG, Plug Mounting, Dimensions: 2.93 in L x 1.96 in W x 2.92 in H, Operating Temperature: 60 to 75 deg C

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-purpose fuses have no time delay and protect fuse panels, appliances and branch circuits.

Provides motor overload, ground fault and short-circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Provides motor overload, ground fault and short circuit protection. Helps protect motors against burnout from overloads and single phasing on three phase systems. Will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds. 250 V maximum. UL listed, CSA Certified.

Cartridge fuses are used to protect motors and branch circuits where higher amps or volt ratings are required. General-Purpose fuses have no time-delay and protect fuse panels, appliances and branch circuits.

Threaded fuse type, porcelain threads. Heat absorbing metal bead on element link for time delay. Passes motor overload starting currents without needlessly opening. Voltage rating of 125 V maximum. Rejection base. UL Listed.