Todos los productos

Raised 1/2 in. Used to support switches or receptacles independent of the box (box must still be used). 6.5 cu-in. UL listed.

Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed.

For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder-coated finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.

For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.

Round polycarbonate, 4 in Dia, 12.5 cu-in black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70 lb fan or 210 lb fixture. Saddle design straddles standard joist. Hands-free installation. 1/2 in setback. Two 1/2 in knock outs on the side. Four cable clamps, mounting hardware, instructions and high-strength, hardened screws included. 2 hrs fire rating, UL Orange Book. UL listed.

Use two to mount switch box with plaster ears to hollow wall. Slips between box and wall, tabs bend inside box.

Steel box cover with single 1/2 in knockout in the center. 4-11/16 in square. UL listed.

Raco Electrical Box Cover, Octagonal, Number of Gangs: 1, Steel, Galvanized, 0.063 in L, 3.63 in W, 3.63 in H

Raco Handy Extension Ring, Number of Knockouts: 8, Steel, 1-7/8 in L, 2-5/4 in W, 4 in H, Includes: (20) Extension Rings

Raco Handy Box, Cubic Capacity: 13 cu-in, Number of Gangs: 1, Number of Knockouts: 10, Knockout Size: 1/2 in, Gray, Steel, Dimensions: 4 in H x 2-1/8 in W x 1-7/8 in D, Surface Mounting

Welded design allows for more working room inside box. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (ends). Three 1/2 in knockouts (bottom). Acceptable for use in 2 hr rated walls. UL listed.

Raco Switch Box, Cable Entry: Knockout, Number of Outlets: 1, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 4.219 in H x 2.25 in W x 3.5 in D, Steel, Gray, Pre-Galvanized, Suitable for: Switches and Outlet, Includes: Plaster Ears

Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include brackets for direct installations on stud, leveling bumps or locking grips for old work.

Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2 hr rated walls. Four cable knockouts (end). One 1/2 in conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3 in x 2 in x 2-1/4 in D. 10.5 cu-in. UL listed.

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2 hr rated fire walls. 1-1/2 in D. 7.5 cu-in. UL listed.

Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs rated walls. UL listed.

Raco Drawn Fan Box, Cable Entry: 1/2 in, Number of Knockouts: 5, Cubic Capacity: 6 cu-in, Round, Steel, 4-1/4 in W, 1/2 in D, 4.38 in H, Ceiling Mounting, Suitable for: Ceiling Fan, Ceiling or Wall Light Fixture, Includes: Mounting Hardware

Conduit wiring system. Welded, with conduit knockouts. Four 3/4 in and four 1 in conduit knockouts (sides). One 1/2 in conduit knockout and three TKOs (bottom). 4-11/16 in square x 2-1/8 in D. 42 cu-in. Installed in ceilings or walls for lighting fixtures or receptacles. UPC code. UL listed.

For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2 in side knockouts, drawn metal, suitable for use in 2 hr fire rated walls. 4 in square x 1-1/2 in D, 22.5 cu-in capacity. UL listed.

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2 in, Number of Gangs: 2, Square, Cubic Capacity: 21 cu-in, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel, Gray, Galvanized

With Non-metallic sheathed cable clamps. Two 1/2 in conduit knockouts and four cable knockouts, (sides). One 1/2 in conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 lb maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL listed.