Todos los productos

FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.

Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50 ft spool.

Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50 ft spool.

Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.

For the do-it-yourselfer, Curt offers an entire line of towing fabrication components to supply you with the quality building blocks you need. These raw steel components are made from solid steel for maximum strength and they come ready to be welded together in whatever form you need to get the job done. Curt fabrication steel receiver tubing can be used to extend the reach of your receiver or to create a piece of custom towing equipment. Each unit is equipped with a 1/2 in reinforcing collar for extra strength and has a raw finish to be ready for welding. This receiver tube has a 2 x 2 in opening and measures 6 in length.

PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.

PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.

For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901.

For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901.

For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture.

FDA-grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.

For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture.

FDA-grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.

For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901.

For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture.

1/4 in x 25 ft poly tubing.

FDA-grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.

Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary.

Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing.

ProSource Heat Shrink Tubing Assortment, Electrical, Suitable for: Wire Connection, Rust Prevention and Corrosion Protection of Solder Joints, Protection and Insulation Processing of Wire End, Wiring Harness & Electronic Components., Includes: 1/8 in D x 3-1/2 in L (15 pc), 3/16 in D x 3-1/2 in L (10 pc), 1/4 in D x 3-1/2 in L (8 pc), 3/8 in D x 3-1/2 in L (4 pc), 1/2 in D x 3-1/2 in L (3 pc) & 3/4 in D x 3-1/2 in L (2 pc)

Elastic construction allows for use in a variety of applications, smooth interior and exterior, flexible in low temperatures.