Todos los productos

Rubber boot inlet and outlet. Full flow design, weighted flapper valve.

Replace your leaky valve caps and show off your edgy side with our hex-head chrome tire valve caps. Each package contains 4 tire valve caps.

Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.

Midland Industries Ball Valve, 2-Piece, 2 in Connection, FPT Connection, Port Type: Full, 1000 psi, Temperature Rating: -60 to 450 deg F, Media: Gas, Oil, Water, Trim Material: Stainless Steel, Softgoods Material: Reinforced PTFE, Stainless Steel Handle, Dimensions: 4.88 in L x 6.13 in W x 4.25 in H

Midland Industries Ball Valve, 2-Piece, 1 in Connection, FPT Connection, Port Type: Full, 1000 psi, Temperature Rating: -60 to 450 deg F, Media: Gas, Oil, Water, Trim Material: Stainless Steel, Softgoods Material: Reinforced PTFE, Stainless Steel Handle, Dimensions: 3.15 in L x 4.88 in W x 2.5 in H

Midland Industries Ball Valve, 2-Piece, 1/2 in Connection, FPT Connection, Port Type: Full, 1000 psi, Temperature Rating: -60 to 450 deg F, Media: Gas, Oil, Water, Trim Material: Stainless Steel, Softgoods Material: Reinforced PTFE, Stainless Steel Handle, Dimensions: 2.24 in L x 4.17 in W x 2.28 in H

Midland Industries Ball Valve, 2-Piece, 1-1/4 in Connection, FPT Connection, Port Type: Full, 1000 psi, Temperature Rating: -60 to 450 deg F, Media: Gas, Oil, Water, Trim Material: Stainless Steel, Softgoods Material: Reinforced PTFE, Stainless Steel Handle, Dimensions: 3.58 in L x 5.04 in W x 3.19 in H

Midland Industries Ball Valve, 2-Piece, 1-1/2 in Connection, FPT Connection, Port Type: Full, 1000 psi, Temperature Rating: -60 to 450 deg F, Media: Gas, Oil, Water, Trim Material: Stainless Steel, Softgoods Material: Reinforced PTFE, Stainless Steel Handle, Dimensions: 4.05 in L x 6.1 in W x 3.54 in H

SharkBite® max slip ball valves are ideal for replacing or adding a new ball valve into an existing line to shut-off water flow for servicing and making repairs. Slip feature allows for two in of rigid copper or CPVC pipe to be cut-out of an existing line and connected back together by using the disconnect tool to slide the fitting back-to the other end of pipe. Innovative push-to-connect design makes for quick and easy installation. Good item to keep on hand for freezes or other emergency repairs.

SharkBite® max slip ball valves are ideal for replacing or adding a new ball valve into an existing line to shut-off water flow for servicing and making repairs. Slip feature allows for two in of rigid copper or CPVC pipe to be cut-out of an existing line and connected back together by using the disconnect tool to slide the fitting back-to the other end of pipe. Innovative push-to-connect design makes for quick and easy installation. Good item to keep on hand for freezes or other emergency repairs.

SharkBite® max ball valves with mounting tabs feature a drain/vent that allows for water to be drained from the line if needed and a mounting tab for stability when attaching the plumbing fixture to other surfaces. Compatible with PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe in any combination. Innovative push-to-connect design makes for quick and easy installation. Faster install time and ease of use reduces installation errors.

SharkBite® max ball valves with mounting tabs feature a drain/vent that allows for water to be drained from the line if needed and a mounting tab for stability when attaching the plumbing fixture to other surfaces. Compatible with PEX, copper, CPVC, PE-RT and HDPE SDR-9 pipe in any combination. Innovative push-to-connect design makes for quick and easy installation. Faster install time and ease of use reduces installation errors.

SharkBite® max ball valves innovative push-to-connect design makes for quick and easy installation when needing to install a new or replacement ball valve. Compatible with PEX, copper, CPVC and PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve can be installed where water shut-off is needed and rotated after install for easier installation in tight spaces.

SharkBite Max ball valves innovative push-to-connect design makes for quick and easy installation when needing to install a new or replacement ball valve. Compatible with PEX, copper, CPVC and PE-RT pipe in any combination without a need for soldering, clamps, glue or unions. The valve can be installed where water shut-off is needed and rotated after install for easier installation in tight spaces.

Innovative push to connect ball valve design makes for quick and easy installations and allows you to join to PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination without a need for soldering, clamps, glue or unions. The ball valve can be rotated after installation making it easier to reach the shut-off. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.

Apollo PEX valves are designed to control water flow to plumbing fixtures with simple On/Off water flow control to faucets, toilets and home appliances. Controlling water flow at each fixture allows for maintenance and replacement of fixtures without the need to shut down the entire piping system. Designed for use with Apollo PEX crimp rings, stainless steel pinch clamps or stainless steel sleeves, various outlet connections allow for the use of supply lines with compression threaded ends. Apollo PEX ball valves are the best solution to add flow control or replace a valve in a potable or hydronic water heating PEX system. Apollo PEX ball valves are suitable for use in conjunction with stainless steel sleeves, stainless steel pinch clamps and copper crimp rings.

Apollo PEX valves are designed to control water flow to plumbing fixtures with simple On/Off water flow control to faucets, toilets and home appliances. Controlling water flow at each fixture allows for maintenance and replacement of fixtures without the need to shut down the entire piping system. Designed for use with Apollo PEX crimp rings, stainless steel pinch clamps or stainless steel sleeves, various outlet connections allow for the use of supply lines with compression threaded ends. Apollo PEX ball valves are the best solution to add flow control or replace a valve in a potable or hydronic water heating PEX system. Apollo PEX ball valves are suitable for use in conjunction with stainless steel sleeves, stainless steel pinch clamps and copper crimp rings.

SharkBite Ball Valve, 3/4 in Connection, Media: Water, Body Material: Brass

SharkBite Ball Valve, 1/2 in Connection, Barb Connection, 200 psi, Temperature Rating: 200 deg F, Media: Water, Body Material: Brass

Apollo® ExpansionPEX valves are exclusively designed for use with PEX-A pipe. They offer a larger ID than traditional valves for full flow resulting in fast delivery of potable water.

Apollo® ExpansionPEX valves are exclusively designed for use with PEX-A pipe. They offer a larger ID than traditional valves for full flow resulting in fast delivery of potable water.