Todos los productos

The small trimming plane is small and convenient. With a small, lightweight body for modeling, sculpture and other light work and nickel-plated for durability, this tool is built to deliver clean, precise cuts.

The Bosch GLL330-80CGL 18 V 360 deg connected green-beam three-plane leveling and alignment laser with one 4 Ah battery provides an all-in-one level and alignment solution with incredible power flexibility. Versatile power options help maximize productivity and keep the laser up and running, with the ability to use the included CORE18V® 4 Ah battery or 4X C cell alkaline batteries (sold separately). Built-in VisiMax™ technology monitors temperature and power consumption to deliver the brightest line for the job, optimize energy efficiency and provide long term tool reliability. The leveling laser emits three bright green-beam laser chalk lines in 360 deg laser planes one horizontal and two vertical for high-visibility and fast job setup from one initial point. Full rubber over mold housing with a foam-reinforced interior helps protect the level at every major impact point. The laser is IP65 rated (tool only) for dust-tight and water-resistant durability in tough jobsite conditions. An integrated multi-purpose magnetic laser mount with fine adjustment and pivot rotation provides accurate point-to-point alignment for enhanced versatility. The laser has a working range of up to 115 ft and the bright, vivid thin lines provide an accuracy of 1/8 in at 30 ft. Further extend the range to 400 ft (measured at the horizontal line at 45 and 225 deg) with the levels receiver compatibility (sold separately). Equipped with a Smart Pendulum System, the tool self-levels, will indicate any out-of-level condition and then locks when switched off for secure transport. Fully featured with Bluetooth connectivity, manage the setup of the laser from across the room with a paired smartphone and the free Bosch leveling remote app. Power-saving mode and brightness adjustment options help maximize battery life. Keep a handle on the laser with the rubber-grip base and easily position using the strong magnets or 1/4 and 5/8 in threading mounts.

The adjustable block plane is precise and durable. Its cutter rests at 21 deg angle for cross-grain planing. With machined sides, adjustable cutter, case-iron base with precision ground sides and bottom, epoxy coating and finger rest, this tool is built to deliver clean, precise cuts and to last for several generations.

The #4 adjustable bench plane is precise and durable. Its high-impact polymer handles and knobs are contoured and polished for comfort and control. With case-iron base, epoxy coating, hardened, tempered steel cutter edge, quick release cam-lock and a cutter that manually adjusts, this tool was built to deliver clean, precise cuts and to last for several generations.

You can give them as gifts or add them to holiday decorations.

This Concrete Placer is made completely out of 13 gauge steel making it more durable. The placer is equipped to make placing concrete easier. This product is reliable and built to last.

The OXO Good Grips cherry and olive pitter has a pressure-absorbing, non-slip grip that makes pitting even a pie's worth of fruit effortless. A splatter shield protects your work area and clothing from messy juices and removes for easy cleaning. Our sturdy, die-cast zinc pitter has a generous holder that accommodates large cherries like bing and rainier as well as a recessed design that secures smaller varieties of cherries and olives. The pitter locks closed for safe and compact storage. dishwasher-safe.

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi. Supports 5000 lb. Certified Water Tight by the Water Systems Council Pitless Adapter Division.

Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-ring. Vertical position indicator. Fits 5 to 12 in well casing with 1 in drop pipe. Factory tested to 250 psi. Supports 5000 lb. Certified Water Tight by the Water Systems Council Pitless Adapter Division.

For #22368A pump. Complete with rod.

Designed for rugged, long-life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4 in pipe connection. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing.

The Pitched Ceiling Support Kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing (AF). Selection of the Adjustable Flashing is determined by the pitch of your roof.

This fire pit that reduces its own wood burning smoke by up to 70%. The easy to use, groundbreaking smoke free HotShot Wood Burning Fire Pit is a brand-new way to enjoy the dancing fire light, while cuddling by the crackle of the fire, without having the overwhelming smoke odor saturate your clothing. This advanced design uses intake vents in the double insulated fire pit walls and base, to super-heat the air, and then feed it back into the fire bowl, creating a secondary combustion. This causes it to burn off circulating particulates within the fire bowl making it a super oxygenated fire for an efficient burn. This new CleanAir Smoke Free Technology removes up to 70% of the particulates in its smoke when the wood level is kept below the top edge. Enjoy the super-charged heat, with barely any of the smoke, and very little ash; while enjoying your natural wood burning fire pit.

The Crosman American Classic is the ultimate backyard plinker. This 0.177 caliber pellet pistol features a single shot bolt action for easier cocking and loading and a rifled steel barrel for accuracy. Get variable pump power with the easy-pump forearm and control the velocity up to 695 fps for your style of target shooting. Comes with a fully adjustable rear sight and fixed-blade front sight.

Charlotte Pipe, Cellular Core, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White

Charlotte Pipe, Foam Core, Plain End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, Operating Temperature: <140 deg F, Schedule Rating: SCH 40, PVC, White

Charlotte Pipe, Foam Core, Plain End, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.145 in, 20 ft L, Operating Temperature: <140 deg F, Schedule Rating: SCH 40, PVC, White

Serrated stainless steel blade requires less force to make a cut, leaving a flush end. Rubberized handles allow for confident cutting even in wet or dirty environments. Cuts up to 1 in nominal.

Nibco Tubing Strap, Opening Size: 3/4 in, CPVC

Nibco Tubing Strap, Opening Size: 1/2 in, CPVC

in our goal of being your excellent source for all things towing, the curt line of trailer jacks is designed with care and manufactured with pride. Curt jacks are made with quality to promote the life and function of your trailer and they come in several different styles to accommodate your needs, whether you are a frequenter of the boat landing, the campground, the racetrack or the farm. This replacement jack mounting bracket is the male pipe end, intended to mount a curt swivel jack. It allows for easy swiveling of the jack post, to be folded up and out of the way when not in use and inserts into the female pipe end #28930. It comes with a 9/16 in pin hole.