Ir al contenido

Todos los productos

PRO-FLEX STRIKER PLATE 3X7IN

Protective devices required where tubing passes through structural members.
$ 4.59

PRO-FLEX MANIFOLD 3/4X1/2/3/4

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Size: 1/2 in, Outlet Connection Type: FNPT, Metal
$ 21.99

PRO-FLEX INSTALLATION GUIDE

Pro-Flex Installation/Training Guide, Title: CSST
$ 3.29

PRO-FLEX GAS APPLIANCE KIT

The Pro-Flex Single Appliance Kit is provides everything needed for hooking up gas to one appliance such as a traditional water heater, gas fireplace, gas logs, gas dryer or many other appliances.
$ 99.99

PRO-FLEX CONDUIT 1-1/4X12IN

Pro-Flex Floppy-Flex Protective Conduit, Trade Size: 1-1/4 in, Aluminum, Galvanized, 12 in L, Operating Temperature: 32 to 200 deg F, Suitable for: 3/4 in CCST Tubing
$ 5.69

PRO-FLEX BRASS TEES 1/2IN

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.
$ 24.99

PRO-FLEX BRASS TEE 3/4X3/4X1/2

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.
$ 24.99

PRO-FLEX BRASS MALE FITTING3/4

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing.
$ 14.99

PRO-FLEX BRASS FEM FITTING 3/4

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing.
$ 14.99

PRO-FLEX BONDING CLAMP 3/8-1/2

UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
$ 9.99

PRO STAIR TOOL HVYD STEEL 4IN

Designed primarily for stair tucking, the ROBERTS carpet tucker can also be used to set carpet into tack strips, drive carpet into gullies and crease carpeting along wall lines. The carpet tucker features chrome-plated steel construction and a slip-resistant handle.
$ 25.99

PRO PRUNER BYPASS PRO EURO

This pro-style pruner features adjustable blade tension to fit your hand strength and the toughness of the material you're cutting, plus an angled cutting head that helps reduce wrist fatigue. A fully hardened, precision-ground steel blade stays sharp, a low-friction coating helps the blade resist rust and makes cutting even easier and a built-in sap groove provides smooth operation.
$ 25.99

PRO MOP BUCKET 32QT W/ WRINGER

Features and integrated side press wringer with bucket, plastic bucket is strong, durable and easy-to-clean, heavy-duty steel casters, commercial quality construction, rust-resistant.
$ 94.99

PRO MIXING PADDLE STL 23-1/2IN

The QEP 24 in professional mixing paddle is designed for the professional tile installer to mix setting materials quickly and easily. This mixing paddle minimizes the introduction of air into the mixture, minimizing air bubbles that may cause installation issues. Crafted with chrome plated steel, this mixing paddle is durable and extremely easy to clean.
$ 16.99

PRO MIX W/MYCORRHIZAE 3.8CF

Pro-Mix BX is the solution for growers seeking to benefit from perlite's as well as its drainage and aeration capabilities. Combined with high-quality fibrous peat moss, this formulation is ideal for growers looking for a general-purpose medium which creates a well-balanced growing environment.
$ 67.99

PRO MINI PRY BAR 32DEG 10IN

Roberts Pro Mini Pry Bar, Number of Nail Slots: 2, HCS, Bright Nickel, 10-1/2 in L
$ 15.99

PRO INSTALLATION PLIER RUB GRP

The QEP Pro Pliers are designed to accommodate both the Original LASH® and Xtreme™ Pro series tile leveling systems. These pliers make pushing the wedges (part B of the Leveling System) into the clips (part A of the Leveling System) much easier than doing it by hand, allowing you to apply the right amount of pressure without overtightening. These tile leveling pliers are ideal to install tile with consistent and professional results.
$ 25.99

PRO GROUT SAW W/2 CARBIDE BLD

The QEP professional grout saw is designed to easily remove old, dirty or pitted grout. The 10093 includes two heavy-duty carbide blades. Use one blade for thinner grout lines and two blades for wider grout lines. The ergonomic handle helps minimize hand fatigue during repeat use. Designed to maintain exceptional leverage and accuracy, this durable handle provides increased control and comfort.
$ 15.99

PRO FLOOR & WALL SCRAPER 4IN

The ROBERTS Floor and Wall Scraper removes tough materials like stubborn glue and flooring, leaving surfaces smooth and prepped. The 18 in. handle was crafted with a cushioned grip and an ergonomic, ball cap at the end for more comfortable scraping, because tough jobs don’t need to be tough on the body. This scraper includes 1 high speed carbon steel blade that maintains a sharp edge.
$ 29.99

PRO CRPT SEAM RLR STAR WHL 6IN

Roberts Star Wheel Carpet Seam Roller, Roller Diameter: 4 in, Roller Material: Steel, Soft-Grip Handle, Rubber Handle, Handle Color: Red, 7 in L Handle
$ 25.99

PRIVACY LEVER CTL G2 2-3/4BS

Complies with ANSI A156.2, Grade 2 (400,000 cycles), UL listed for 3 hr fire door, ANSI A117.1 American Disabilities Act (ADA). Door range of 1-3/8 to 2 in. Backset of 2-3/4 in standard. Strike, T-strike (1-1/8 in x 2-3/4 in) standard. Cylindrical, steel-coated with zinc dichromate (corrosion resistance). Latch bolt operated by lever from either side, outside lever locked by pushbutton on inside, unlocked by emergency release on outside, rotating inside lever or closing door.
$ 97.99