Todos los productos

Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 90, Collation Angle: 30 deg, Collation Type: Paper, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering Mode: Tool-Free Selectable, Ergonomic Handle, Housing Material: Magnesium, Yellow, Dimensions: 19-3/4 in L x 5-3/4 in W x 12-3/4 in H, Includes: 3/8 in NPT Male Plug

With this nailing system, you'll have any interior remodeling job done in no time. Get the access and maneuverability you need in tight spaces with this lightweight yet powerful pneumatic nailing system. When used with Paslode nails, this nailing system can help you drive jobs home on time, every time.

The excellent only gets better. The Pro preferred brand of pneumatic nailers introduces an addition to the durable A5 series tools, with the 3-1/4 in 21 deg pneumatic framing nailer with aluminum magazine, model NR83A5S1. It offers the same features and performance as the legendary NR83A5 but its now equipped with an aluminum magazine. This new aluminum magazine shares many components with the classic steel magazine including the ribbon spring. This nailer relies on the same cylinder valve system as the original model from the 80's, providing rapid response and high-driving power.

The excellent only gets better. The Pro preferred brand of pneumatic nailers introduces an addition to the durable A5 series tools, with the 3-1/4 in 21 deg pneumatic framing nailer with depth adjustment and aluminum magazine, model NR83A5Y. It offers the same features and performance as the legendary NR83A5 but its now equipped with an aluminum magazine. This aluminum magazine shares many components with the classic steel magazine including the ribbon spring. This nailer relies on the same proven cylinder valve system as the original model from the 80's, providing rapid response and high-driving power.

The 21 deg full round head 3-1/2 in framing nailer model AN924 combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing or siding and sub-flooring. It is ideal for framers, roofers and carpenters. The AN924 drives 21 deg plastic collated framing nails from 2 in to 3-1/2 in length and 0.113 to 0.148 in diameter. It has a two-mode selector switch bump, sequential for increased convenience. The AN924 has a lightweight design only 8.3 lb with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook and an ergonomic rubberized grip.

Great 3-1/2 in 30 deg paper collated framing nailer for flooring and framing, truss build-up, roof decking, wall sheathing and housing construction. The lightweight Paper Collated Framing Nailer weighs only 7 lb, making it easy to use all day, while still providing the power of bulkier, heavier nailers. The newly redesigned head guard allows for a faster and easier disassembly process, saving you valuable time during tool maintenance.

The NR90AE(S1) framing nailer drives plastic collated nails from 2 in up to 3-1/2 in length and features Metabo HPT's next generation "industrial design." Weighing only 7.5 lb, it is easy-to-use all day, while still providing the power as other bulkier and heavier framing nailers. It can be used for flooring and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction. The redesigned head guard of the NR90AE(S1) framing nailer allows for a faster and easier disassembly process, saving valuable time during tool maintenance.

The NV83A5 round head coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A .The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

The FN91T1 delivers the power and durability demanded by professional contractors for all-day performance on the toughest jobsites. It drives a wide range of paper tape collated nails from 0.113 to 0.135 in diameter and 2 to 3-1/2 in length. Upgraded features include, an ergonomic design, an inline magazine for clear line of sight and a tool-free depth of drive for quick adjustments.

This 33 deg paper tape framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. depend on this 33 deg paper tape framing nailer for efficiency.

Our M18 FUEL™ 21 deg framing nailer sets the new standard for cordless framing nailers. By leveraging our nitrogen spring mechanism, POWERSTATE™ brushless motor and REDLINK™ intelligence, this nailer provides you with pneumatic performance and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer allows you to tackle even the most demanding framing applications. To keep you productive and efficient throughout the day, the framing gun fires three nails per second with zero ramp-up time, meaning a nail is fired as soon as you pull the trigger. Additionally, the cordless framing nailer operates using only our REDLITHIUM™ batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The M18 FUEL™ 21 deg framing nailer delivers the pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

Our M18 FUEL™ 30 deg framing nailer sets the new standard for cordless framing nailers. By leveraging our nitrogen spring mechanism, POWERSTATE™ brushless motor and REDLINK™ intelligence, this nailer provides you with pneumatic performance and the convenience and freedom of cordless power. Delivering the power to sink full round head nails into dense engineered lumbers, this framing nailer allows you to tackle even the most demanding framing applications. To keep you productive and efficient throughout the day, the framing gun fires three nails per second with zero ramp-up time, meaning a nail is fired as soon as you pull the trigger. Additionally, the cordless framing nailer operates using only our REDLITHIUM™ batteries (not included) and sealed compressed nitrogen to drive each nail, completely eliminating the cost of gas cartridges and maintenance associated with competitors' nailers. The M18 FUEL™ 30 deg framing nailer delivers the pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

Bostitch Framing Nailer, 3/8 in Air Inlet, Air Consumption: 6.4 cfm/Shot, Air Pressure: 70 to 120 psi, Magazine Capacity: 100, Magazine Loading: Top, Collation Angle: 28 deg, Collation Type: Wire Weld, Exhaust Type: Fixed, Fastener Size: 0.113 to 0.131 in Dia x 2 to 3-1/4 in L, Triggering Mode: Tool-Free Selectable, Ergonomic Handle, Housing Material: Magnesium, Yellow, Dimensions: 20-1/2 in L x 5-3/4 in W x 12-3/4 in H, Includes: 3/8 in NPT Male Plug

The CFRN9021-B is one of the most versatile framing nailers in the industry. The CFRN9021-B can be used in framing, sheathing, siding, trusses, bridging, engineered lumber, strapping, fencing, exterior decks and sub-flooring.

The 20V MAX* 21deg plastic collated cordless framing nailer delivers the performance demanded by pros to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4 in and 0.148 in Dia into a wide range of materials. Its compact shape, well balanced design and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.

This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 21 deg plastic collated framing nailer for efficiency.

This well-balanced lightweight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth shank full round head nails for tough fastening jobs.

Lightweight, high-performance, low-maintenance. The paslode 16 ga pneumatic finish nailer has a best-in-class design that allows for comfort in all applications. This is a reliable and durable tool you can trust to keep up with you. The oil-free design allows for long term, maintenance-free operation which reduces clean-up time and associated costs.

The CFN64 finish nailer can be used for a variety of applications. It is ideal for installing molding, chair rail, cabinetry and other finish applications. It accepts 16 ga finish nails from 1 to 2-1/2 in.

The DeWALT DCN662 20 V Max XR 16 ga cordless straight finish nailer drives 16 ga straight finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening baseboards, door/window casing and crown moulding. With its brushless motor powered by a DeWALT 20 V max Lithium-Ion battery the DCN662 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.

The Powernail Model 445FS mallet-actuated, pneumatic stapler uses the same proven design that has made our nailers the standard of the commercial flooring industry. You can be assured that the Model 445FS will stand up to the rigors of daily use for years and it will help you install a floor you can be proud of. When using staples to install 3/4 in and 5/8 in Tongue and Groove domestic hardwood flooring, the 445 FS tool delivers proven quality and professional results.