Todos los productos

Easily repair textured ceilings with RUST-OLEUM® Zinsser® ready-mixed popcorn ceiling patch. This ready-mixed product duplicates the look and texture of an acoustic ceiling, making damaged areas good as new again.

Custom Pre-Mixed Floor Patch, Paste Like, Net Content: 1 qt, Pail, Compositions: Crystalline Silica, Quartz, Calcium Carbonate and Ethylene Glycol, VOC Content: 43 g/L, Temperature Rating: 50 to 100 deg F, pH Range: 9 to 10, Specific Gravity: 1 to 2 g/cc, Drying Time: 4 hr, Applicable Materials: Cement, Ceramic, Plywood, Vinyl

No-rust aluminum plate provides rigid backing. Self-adhesive patches. Fiberglass mesh eliminates the need to pre-plaster.

Use to patch walls, ceilings and hollow core doors. Fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without additional backing. Works with drywall, plaster, wood and most other materials. Will not rust or bleed through.

Quikrete® Vinyl concrete patcher is a high-strength polymer-modified repair material for making thin structural repairs to concrete surfaces.

Quikrete® Vinyl concrete patcher is a high-strength polymer-modified repair material for making thin structural repairs to concrete surfaces.

BONDS ON is a high-strength, multi-purpose, self bonding cement repair material for thin section repair and resurface, from 1/2 in to feather-edge, on concrete, stucco and masonry. Use to repair chipped, cracked or spalled concrete, to build-up broken step corners or to resurface floor and walls, driveways and walks. Also use to set tile, flagstone and slate. BONDS ON provides a high-strength finish which is significantly stronger than a regular cement mix. Just add water and mix. Since BONDS ON includes a vinyl resin, no liquid bonding agents or additives are needed.

BONDS ON is a high-strength, multi-purpose, self bonding cement repair material for thin section repair and resurface, from 1/2 in to feather-edge, on concrete, stucco and masonry. Use to repair chipped, cracked or spalled concrete, to build-up broken step corners or to resurface floor and walls, driveways and walks. Also use to set tile, flagstone and slate. BONDS ON provides a high-strength finish which is significantly stronger than a regular cement mix. Just add water and mix. Since BONDS ON includes a vinyl resin, no liquid bonding agents or additives are needed.

SuperPatch is a two-component, multi-purpose, waterproofing mortar for patching, repairing or resurfacing concrete, masonry, stucco and brick, up to 1 in thickness in one application. Exact amount of powder and liquid are included in this container. Just mix the powder with liquid together in a clean container. SuperPatch is a non-shrink, unique formula with exceptional strength and adhesion for use on worn surfaces. It evens sticks to glass, steel, aluminum and wood, so is ideal for areas abutting these materials. Can be feather edged or applied up to 3 in thickness, using multiple layers. Ideal to anchor bolts, railings and other fixtures into concrete or to build-up worn or broken step corners without using forms. Use for vertical or horizontal, above or below grade patch and repair projects both inside and out. Will not cause acidic reaction with aluminum.

DAP® Bondex® Concrete patch is a ready-to-use material for the repair of holes, cracks and other imperfections in concrete or masonry surfaces. The product is excellent for tuck-pointing masonry and brick work. It may also be used as a glue to join broken pieces of concrete or brick. The material dries to a concrete gray color.

Henry® 615 PatchPro™ is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete on all grade levels.

Use in hot or cold weather to repair holes and large cracks in asphalt driveways and pavement. Does not require heating or mixing, simply pour and tamp for instant surface use. Can be formed and compacted.

Gasoila All Purpose Water Finding Paste, Net Content: 2 oz, Tube, Brown/Red, Viscosity: 300,000 cSt, Specific Gravity: 1.1, pH Range: 7

DAP® /Bondex® Spackling paste is a ready mixed, easy-to-use professional-grade, patching material used to fill holes and cracks and treat surfaces prior to painting. The product has a smooth working consistency, dries quickly, is non-shrinking and sands easily, recommended for interior use only.

Gorilla waterproof patch and seal paste is a thick, flexible rubberized sealant paste that clings to multiple surfaces to instantly fill large gaps, cracks and holes. Once applied, the high-strength formula smoothly covers the surface tightly sealing out water, air and moisture, resulting in lasting repairs.

Gorilla waterproof patch and seal paste is a thick, flexible rubberized sealant paste that clings to multiple surfaces to instantly fill large gaps, cracks and holes. Once applied, the high-strength formula smoothly covers the surface tightly sealing out water, air and moisture, resulting in lasting repairs.

Oatey H-205 water soluble Paste Flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-205 Paste Flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-205 Paste Flux remains active up to 700 deg F. H-2O5 Flux complies with CA and VT lead content regulations.

Oatey H-205 water soluble Paste Flux cleans and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-205 Paste Flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-205 Paste Flux remains active up to 700 deg F. H-2O5 Flux complies with CA and VT lead content regulations.

Oatey H-2095 water soluble tinning flux cleans, tins and fluxes most commonly soldered metals including copper, brass, zinc, galvanized iron, lead and tin or copper-coated metals. Fluxing is a critical step in the soldering process. H-2095 tinning flux is lead-free and ideal for copper systems including fire sprinkler, hydronic heating, potable water service and DWV piping. H-2095 Tinning Flux remains active up to 700 deg F. H-2O95 Flux complies with CA and VT lead content regulations.

Ruby Fluid® soldering and tinning paste flux 1.69 oz (47.91 g). Plumbers, workers in brass, copper, tin, steel and stained glass will achieve great results with this easy-to-use product. Produce strong, neat and durable joints. Ruby Fluid® allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Also available in liquid (Forney 60301). Bulk version is Forney 38125.

Nokorode® regular paste flux will not freeze or decompose. No odor. Lead-free. Recommended for use on all solder alloys including 95/5 and all lead-free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Certified to NSF/ANSI Standard 61, Annex G.