Todos los productos

Finish your metal, wood and composite dry sanding projects with the aggressive cutting action of the MultiSand A212/A213/A215 fine grit paper sheet. The paper comes in A-weight or C-weight, making it ideal for general-purpose hand sanding or machine sanding applications. The P-graded, aluminum oxide grain produces cuts that remove old paint from your surfaces and sands wood, metal, plastic and fiberglass. Great for finishing and final surface prep making this fine grit paper a cost-effective option for a range of projects.

Use MultiSand A213 medium-grit paper sheet with your sanding block or board for general-purpose sanding, finishing and cleaning and detailing. This paper employs a high-quality P-grade aluminum oxide grain abrasive, open coating and C-weight backing to work like a champ for hand sanding and light mechanical applications on a wide range of materials, including plastic, fiberglass and composites, aluminum, brass, titanium and super alloys, hard and soft-carbon and 300 series stainless steels and hard and soft woods. Use this paper for removing old paint and moderate material removal.

Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.

When AA or even AAA batteries just aren't right, our miniature alkaline batteries are sure to fit your device. Browse our full range of miniature batteries for electronics around the house like keyless entry, electronic books and glucose monitors.

Used for allowing heavy appliances and furniture to move smoothly on all non-abrasive floor surfaces like low pile carpet, vinyl, hardwood and more. With screws.

Install in wooden legs to help smoothly move furniture over flooring. Plastic base.

With Polyethylene flange fits 3 and 4 in lines. Extra thick wax gasket with 40% more wax saves using two wax rings for faster installation and a more positive seal. For problem areas that need extra thick wax gasket. Boxed.

National Hardware Eye Bolt, Thread Type: Coarse, Thread Size: 1/2-13, Thread Length: 3-3/4 in, TPI/Pitch: 13, Shank Diameter: 7/16 in, Shank Length: 6.14 in, Shoulder Diameter: 0.44 in, Eye Diameter: 1 in ID, 8 in OAL, Working Load Limit: 300 lb, Steel, Zinc, Includes: Hex Nuts

Strong, rust-resistant body and steel eye bolts. Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications.

Designed for tightening or drawing together various lines and cables. Ideal for marine and other outdoor applications. Strong, rust-resistant body with steel eye and hook bolts. Clear-coated aluminum body.

Five edge cutting design. 18% faster cutting than round line. Reduces drag on engine. Cleaner cutting reduces ragged edges, grass less likely to turn brown. Silicone-coated line will not melt or bind in trimmer heads.

National Hardware Door Pull, Projection Size: 1.26 in, Plate Size: 0.1 in, Grip Thickness: 0.2 in, 0.906 in W, 1.26 in D, 6-1/2 in H, Steel, Zinc, Fastener Type: Screw

National Hardware V30 Safety Hasp, Staple Type: Non-Swivel, Shackle Diameter: 0.35 in, Steel, Zinc, 2-1/2 in L, 1 in W, Material Thickness: 0.07 in, Mounting Hole Diameter: 0.22 in, Screw Mounting, Suitable for: Boxes, Cabinets, Doors and Trunks, Includes: Rigid Non-Swivel Staple

National Hardware Narrow Hinge, 10 lb Weight, Door Leaf Width: 2 in, Door Leaf Thickness: 0.056 in, Frame Leaf Width: 2 in, Frame Leaf Thickness: 0.056 in, Number of Knuckles: 5, Pin Type: Fast Spun, Pin Diameter: 0.128 in, Orientation Type: Left, Right, Mortise Mounting, Number of Mounting Holes: 4, Mounting Hole Diameter: 0.218 in, Hole Spacing: 1.437 in, Steel, Zinc, Dimensions: 1.564 in L x 2 in W

National Hardware Door Stop, Projection Size: 3 in, 3-43/64 in L, Rubber/Steel, Satin Nickel, Baseboard, Wall Mounting, Includes: Screws

Linzer Paint Brush, Nylon/Polyester Bristle, Ferrule Material: Stainless Steel, Wood Handle, Beaver Tail Handle, 1 in W

For gloss and semi-gloss paints. For smooth surfaces. High-density foam.

ApolloPEX™ poly alloy couplings are the most economical fitting available for the joining of PEX pipe.

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Omaha Basting Brush, Brush Width: 1-3/4 in, Plastic Handle, Handle Color: Black

Omaha 2-Way Grill Brush/Scrubber, 2-3/8 in L Brush, Brush Width: 2-1/4 in, Stainless Steel Bristle, Plastic Handle, Handle Color: Black, 14 in L, Includes: Stainless Steel Scraper