Todos los productos

PM Flashing Hazard Light, Battery Type: Alkaline, Battery Voltage: 12 V, Flash Rate: 180 fpm, 6.3 in L, 1.9 in W, 3.95 in H, Red, Magnet Mounting

PM Flashing Hazard Light, Battery Type: Alkaline, Battery Voltage: 12 V, Flash Rate: 180 fpm, 6.3 in L, 1.9 in W, 3.95 in H, Amber, Magnet Mounting

Mr. BAR-B-Q Fire Starter

This advanced hawk design provides a comfortable, soft grip and a swivel ring that facilitates easy turning. Lightweight aluminum blade is grooved to keep compound from slipping. Ergonomic handle hugs the curve of the hand to prevent calluses. Rounded corners for safety. Open handle will fit ideally on staging post. Rubberized grip prevents slippage.

The Vulcan 169503L Hawk is made of heavy gauge hard-rolled aluminum with smooth edges and round corners for convenience. The 13 in L x 13 in W wood handle and sponge callus preventer is included.

MARSHALLTOWN hawks are the ideal masonry tools for holding mortar and plaster. The flat surface allows for easy access to the material, making it convenient for applying it to walls and other surfaces. The DuraSoft® handle provides a comfortable grip and is designed to rest on scaffolding posts. Choose your hawk material (aluminum, composite or magnesium), length, width and handle material. All MARSHALLTOWN hawks bring quality and reliability to every job and are made in the USA with global materials.

Made of heavy-gauge hard-rolled aluminum. Smooth edges and round corners for convenience. Wood handle and sponge callus preventer included.

Estwing's solid steel milled face shingler's hammer has a fully polished head and handle neck, molded on nylon vinyl grip and a retractable cutting blade. Adjustable for 4 in, 5 in, 5-5/8 in exposure.

Estwing's solid steel Shingler's hatchet has a fully polished head and handle neck, molded on nylon vinyl Shock Reduction Grip®.

SH shingling hatchet fully polished with milled, crowned face, nail slot and back blade. Three-hole gauge such as 4-1/2 in, 5 in and 14.3 cm for USA standard and metric shingle measurement. Top quality, hickory handle.

Forged from American made, high carbon steel with a fully polished head and a tempered 3-1/2 in blade. Face has a deep throat and handle is high-density American hickory. Used as an all-purpose, heavy-duty hatchet.

For a compact tool, the Pack Hatchet delivers an impressive amount of function. Exaggerated finger grooves in the handle allow for incredible edge control while choking up to handle detail work and precise cuts.

SH2 22 oz standard half hatchet, full polished head with rust-resistant powder coat finish. 3-1/2 in cut, hickory handle. A fine, standard weight tool for construction trades or handyman. Made in USA.

This red/white 100% polyester hat is unisex suitable for male or female.

Safety Works Hard Hat, Suspension Type: 4-Point Textile, Shell Material: HDPE, Yellow, Fits Hat Size: 6-1/2 to 8 in, Adjustment Type: Wheel Ratchet, Class: E

For on-the-job protection, you can trust Jackson Safety charger hard hats. They meet ANSI Z89.1 - 2009 standards for impact (as well as Class C, G and E) and are made of lightweight, molded HDPE (high density polyethylene). The charger hard hats have a contoured dome with a shorter bill, for improved upward vision. These safety hats are intended to reduce the force of impact that could result from a blow to the top of the head and feature a built-in rain trough. This code comes with plastic pinlock suspension and they adjust to fit heads from sizes 6.5 to 8. Plus, there are built-in accessory slots for attaching additional personal protective equipment (PPE). When you need to protect yourself and your employees against potential head hazards, Jackson Safety charger hard hats are a smart choice.

When you need a hard hat to protect you on the job but want to add a little of your own style, the western outlaw hard hat from Jackson Safety is a good choice. It features a cowboy-like style with a wide 360 deg brim and a four-point ratchet suspension. The Jackson Safety Western Outlaw Hard Hats meet ANSI Z89.1, Class C, G and E. It fits head sizes 6-1/2 to 8.

Safety Works Hard Hat, Suspension Type: 4-Point Textile, Shell Material: HDPE, White, Fits Hat Size: 6-1/2 to 8 in, Adjustment Type: Wheel Ratchet, Class: E

Jackson Safety Sentry III hard hats provide on-the-job protection your workers. They are intended to reduce the force of impact that could result from a blow to the top of the head. These low-profile, silhouette-styled safety hats meet ANSI Z89.1 - 2009 requirements for impact (as well as Class C, G and E). They feature a six-point ratchet suspension system and a flat, customizable front area. You can customize these safety hats to suit your needs: They will fit head sizes 6.5 to 8 and have accessory slots for attaching additional compatible personal protective equipment. When you need to protect yourself and your team, trust Jackson Safety Sentry III hard hats as your first line of defense against potential head hazards.

Safety Works Hard Hat, Suspension Type: 4-Point Textile, Shell Material: HDPE, Yellow, Fits Hat Size: 6-1/2 to 8 in, Adjustment Type: Slip Ratchet, Class: E

This red/white 100% polyester hat is unisex suitable for male or female.