Todos los productos

Injection molded plastic bottom guide fits 7/16 in THK door panels. Installed with double-sided tape or snaps into extrusion fin. Used by several shower door manufacturers.

White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.

Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.

Make perfect corner profiles with any router using the corner routing guide set. You can create decorative corners in three simple steps. First, select and attach the profile you want. Next, adjust the edge stop posts to your material. Finally, rout and you'll get perfect results every time. The guide works with trim routers, handheld routers and even router tables.

N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.

N 6566 is a pocket door guide for 1-3/8 in THK doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.

Forney 4-in-1 Pipe Cutting Guide, Steel, Suitable for: 2-7/8 in Pipe, Includes: Spring Loaded Hinge

Forney 4-in-1 Pipe Cutting Guide, Steel, Suitable for: 2-3/8 in Pipe, Includes: Spring Loaded Hinge

Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping.

National Hardware Single Guide, Aluminum, Gray, Floor Mounting, Dimensions: 1-23/32 in L x 15/16 in W x 5/32 in Thick, Includes: Floor Guide, Installation Hardware

National Hardware Double Guide, Aluminum, Gray, Floor Mounting, Dimensions: 1-3/4 in L x 3/4 in W x 5/32 in Thick, Includes: Floor Guide, Installation Hardware

The Kreg drilling guide makes it easy to create perfectly straight holes without using a drill press. You can get precisely positioned holes with just a hand drill. Featuring six hardened steel drill guides from 1/8 to 1/2 in that do the work of holding your drill in position for you. The Guide features an ergonomic design and Kreg GripMaxx™ material that ensure it stays in place as you use it, so your drill bit won't wander off your mark as you start the hole. The drilling guide also automatically centers on the edge of 3/4 in wide and 1/2 in wide boards and plywood, so you can drill holes that are perpendicular to the edge and perfectly centered. Use the drill guide for all kinds of tasks whether you need a hole for driving a screw, mounting hardware, helping create a dowel joint and much more.

BP101P Bypass door floor guide. Screws into the floor to keep bypass doors straight during operation. Adjustable nylon fits doors from 3/4 to 1-3/8 in.

The multipurpose cutting kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. And with its easy screw-on mounting system, you can install the Dremel® cutting kit in seconds. Kit includes a multi-purpose cutting guide, two drywall cutting bits and a multi-purpose cutting bit.

N 6560 is a two-piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in THK by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.

N 6562 is a three-piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.

N 6563 is a white nylon floor guide for 1-3/8 in THK doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.

N 6567 is a set of two white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.

N 6761 is a three-piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in THK. Used by many closet door manufacturers.

N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.

Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.